?
Solved

Remote net not reachable by transport

Posted on 1997-06-17
2
Medium Priority
?
639 Views
Last Modified: 2013-12-23
I am trying to access a share on an NT server on a remote network across
the internet.  I can access the server via ftp etc., and have it configured
in my LMHOSTS file ( I have verified that the name is preloaded with
nbtstat ).  When I try to do a NET USE or NET VIEW against the server
however, I get the message:

System error 1231 has occurred.
The remote network is not reachable by the transport.

I am running NetBIOS over TCP/IP.  I have been able to access this server
across the internet before but am now setting up a new machine on a
different network.

0
Comment
Question by:dltucker
2 Comments
 
LVL 2

Accepted Solution

by:
armands earned 200 total points
ID: 1560933
Can you ping the remote machine using IP address. I guess you can't. The problem lies in TCP configuration. Run from command prompt WINIPCFG and check your TCP settings. Verify default gateway, subnet mask and IP address of your client machine. When you get the ping working with IP you can look further for name resolution - in your case LMHOSTS file.
0
 

Author Comment

by:dltucker
ID: 1560934
As I mentioned above I can access the server via FTP.  I can alsoping the server and access it as a web server.  I can also accessit using the remote control package Remotely Possible.There are also other servers on my local network that I can access via NET VIEW, NET USE, etc. without any problem.If I access the server via Remotely Possible I can use the NET VIEW, USE, commands on that servers and other servers on that local network as well.  I know that on each network the machines are correctly configured.  The problem is using NetBIOS commands from an machine on one network to a machine on the other.
0

Featured Post

Take Control of Web Hosting For Your Clients

As a web developer or IT admin, successfully managing multiple client accounts can be challenging. In this webinar we will look at the tools provided by Media Temple and Plesk to make managing your clients’ hosting easier.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
This is the first one of a series of articles I’ll be writing to address technical issues that are always referred to as network problems. The network boundaries have changed, therefore having an understanding of how each piece in the network  puzzl…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
There may be issues when you are trying to access Outlook or send & receive emails or due to Outlook crash which leads to corrupt or damaged PST file. To eliminate the corruption from your PST file, you need to repair the corrupt Outlook PST file. U…
Suggested Courses

601 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question