Solved

SB 16 PnP in Linux

Posted on 1997-07-17
1
342 Views
Last Modified: 2013-12-16
hi,
  does any one know how to setup the
Sound Blaster 16 PnP in linux ??
  I tried many times but all failed... :(
the hardest part is it is an PnP and I really don't want
to boot DOS the linux in order to enjoy the music....

please help,
Raymond

Thanks in advance
0
Comment
Question by:raymond8
1 Comment
 
LVL 1

Accepted Solution

by:
hrumayor earned 100 total points
ID: 1812602
I have a PnP sound balster 16, i had no truble in solaris x86 2.5.1, solaris does not suport PnP on this version, so you have
to configure the card some way, or change some jumpers to convert
it to standard isa card, my SB seems not capable on not working as not PnP but it comes with a disc to configure the irq dma and ports so once configured you should change the configuration on the kernel to get it, the default i think it is Dma 2 irq 5 addres 220h so linux must have a way to configure the the dma
irq and addres in a configuraton file in solaris it is in
/platform/pc86i/kernel/drv/*.conf

so i used the dafault it is the same that has solaris so i worked
like a real Pnp i dident have that much luck with a modem card
that i had to disable PnP and configure a irq manualy and
configure ther driver in solaris.

so try configuring your card for a tipic configuration check for conflicts with a dos program to chek irq conflicts too to be shure. and then configure ther driver in linux to get the SB
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
AIX  NFS  question 1 121
NTP Server in VMware 5 165
replace column/record content in a *csv file based on a regular expression 6 53
Martian Packets Unix 5 31
Introduction Regular patching is part of a system administrator's tasks. However, many patches require that the system be in single-user mode before they can be installed. A cluster patch in particular can take quite a while to apply if the machine…
Using libpcap/Jpcap to capture and send packets on Solaris version (10/11) Library used: 1.      Libpcap (http://www.tcpdump.org) Version 1.2 2.      Jpcap(http://netresearch.ics.uci.edu/kfujii/Jpcap/doc/index.html) Version 0.6 Prerequisite: 1.      GCC …
Learn how to find files with the shell using the find and locate commands. Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.:
In a previous video, we went over how to export a DynamoDB table into Amazon S3.  In this video, we show how to load the export from S3 into a DynamoDB table.

867 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now