Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

Remote Dialin x 5

Posted on 1997-07-21
3
Medium Priority
?
185 Views
Last Modified: 2013-12-16
When ever I launch remote dialin I get the normal connection screen  but 5 other icons appear on  the task bar for remote dialin you can click on them but nothing happens any ideas where these ghost icons come from?
0
Comment
Question by:assassin
  • 2
3 Comments
 
LVL 14

Accepted Solution

by:
smeebud earned 300 total points
ID: 1749611
Does your tack manager cntl+alt+del also show multiples of that
app?
0
 

Author Comment

by:assassin
ID: 1749612
Yes there are 5 there but again switch to does nothing strange.....
0
 
LVL 14

Expert Comment

by:smeebud
ID: 1749613
1st check your computer icon, double click it and double click
Dial-up networking. See that you only have 1 of the Dun icon set up.
2nd.
search your registry for multible entries(within the same key) ie; my ISP is erinet, so These key look like this:
--------
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net]
@="Network adapters"
"Installer"="netdi.dll"
"Icon"="-5"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0000]
"DriverDesc"="Dial-Up Adapter"
"AdapterName"="MS$PPP"
"InfPath"="netppp.inf"
"DevLoader"="*ndis"
"EnumPropPages"="netdi.dll,EnumPropPages"
"DeviceVxDs"="pppmac.vxd"
"SLOWNET"=hex:01
"REDIRSESSIONTIMEOUT"=hex:f0
"Logging"="0"
"IPXHeaderCompression"="0"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0000\Ndi]
"DeviceID"="*PNP8387"
"CardType"="FORCEENUM"
"HelpText"="The Dial-Up Adapter lets your computer connect to PPP, RAS and Netware Connect dial up servers using a modem or cable."
"InstallInf"=""
"InfSection"="PPPMAC.ndi"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0000\Ndi\params]

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0000\Ndi\params\Logging]
"ParamDesc"="Record a log file"
"default"="0"
"type"="enum"
@="0"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0000\Ndi\params\Logging\enum]
"0"="No"
"1"="Yes"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0000\Ndi\params\IPXHeaderCompression]
"ParamDesc"="Use IPX header compression"
"default"="1"
"type"="enum"
@="0"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0000\Ndi\params\IPXHeaderCompression\enum]
"0"="No"
"1"="Yes"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0000\Ndi\Interfaces]
"DefUpper"="ndis3"
"DefLower"="vcomm"
"UpperRange"="ndis3"
"LowerRange"="vcomm"
"Upper"="ndis3"
"Lower"="vcomm"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0000\Ndi\Install]
@="PPPMAC.Install"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0000\NDIS]
"LogDriverName"="PPPMAC"
"MajorNdisVersion"=hex:03
"MinorNdisVersion"=hex:0a
-----------
[HKEY_CURRENT_USER\RemoteAccess]
"AreaCode"="513;;937;"
"wizard"=hex:80,00,00,00
"Default"="1erinet"
"EnableRedial"=hex:01,00,00,00
"RedialTry"=hex:64,00,00,00
"RedialWait"=hex:03,00,00,00
"EnableImplicit"=hex:00,00,00,00
"InternetProfile"="1erinet"

[HKEY_CURRENT_USER\RemoteAccess\Addresses]
"1erinet"=hex
[HKEY_CURRENT_USER\RemoteAccess\Profile]

[HKEY_CURRENT_USER\RemoteAccess\Profile\1erinet] ERINET My ISP
"User"="ME"
"IP"=hex:
-----
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\MSTCP]
"NodeType"="1"
"EnableDNS"="1"
"HostName"="ME"
"Domain"="erinet.com"
"SearchList"="erinet.com"
"NameServer"="198.6.245.100,198.6.245.102"
"Lanabase"="0"
"LMHostFile"="C:\\WINDOWS\\lmhosts"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\MSTCP\Parameters]

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\MSTCP\Parameters\Winsock]
"MaxSockAddrLength"=hex:10,00,00,00
"MinSockAddrLength"=hex:10,00,00,00
"HelperDllName"="%windir%\\system\\wsock32.dll"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\MSTCP\ServiceProvider]
"LocalPriority"=hex:f3,01,00,00
"HostsPriority"=hex:f4,01,00,00
"DnsPriority"=hex:d0,07,00,00
"NetbtPriority"=hex:d1,07,00,00
"Class"=hex:08,00,00,00
"ProviderPath"="%windir%\\system\\wsock32.dll"
----------------
More enrties than these indicate multiples.
Also Search 'Dial-up networking" you should have 4 entries in [HKEY_CLASSES_ROOT\CLSID\
----
[HKEY_CLASSES_ROOT\CLSID\{992CFFA0-F557-101A-88EC-00DD010CCC48}]
@="Dial-Up Networking"

[HKEY_CLASSES_ROOT\CLSID\{992CFFA0-F557-101A-88EC-00DD010CCC48}\InProcServer32]
@="rnaui.dll"
"ThreadingModel"="Apartment"

[HKEY_CLASSES_ROOT\CLSID\{992CFFA0-F557-101A-88EC-00DD010CCC48}\DefaultIcon]
@="C:\\WINDOWS\\SYSTEM\\rnaui.dll,0"

[HKEY_CLASSES_ROOT\CLSID\{992CFFA0-F557-101A-88EC-00DD010CCC48}\ShellFolder]
"Attributes"=hex:04,00,00,20
-----------AND IN [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\
THE SAME AS [HKEY_CLASSES_ROOT\CLSID\
---------
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{992CFFA0-F557-101A-88EC-00DD010CCC48}]
@="Dial-Up Networking"

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{992CFFA0-F557-101A-88EC-00DD010CCC48}\InProcServer32]
@="rnaui.dll"
"ThreadingModel"="Apartment"

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{992CFFA0-F557-101A-88EC-00DD010CCC48}\DefaultIcon]
@="C:\\WINDOWS\\SYSTEM\\rnaui.dll,0"

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{992CFFA0-F557-101A-88EC-00DD010CCC48}\ShellFolder]
"Attributes"=hex:04,00,00,20
----------
if this is confusing get back to me.
The answer if you have multiples would be to remove your old DUN and make a new one
0

Featured Post

What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this modest contribution, I want to share with the IT community (especially system administrators, IT Support Engineers and IT Help Desks) about Windows crashes/hangs and how to deal with these particular problems.
Unable to change the program that handles the scan event from a network attached Canon/Brother printer/scanner. This means you'll always have to choose which program handles this action, e.g. ControlCenter4 (in the case of a Brother).
In this video, viewers are given an introduction to using the Windows 10 Snipping Tool, how to quickly locate it when it's needed and also how make it always available with a single click of a mouse button, by pinning it to the Desktop Task Bar. Int…
How to fix incompatible JVM issue while installing Eclipse While installing Eclipse in windows, got one error like above and unable to proceed with the installation. This video describes how to successfully install Eclipse. How to solve incompa…

782 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question