Solved

3ComImpactIQ ISDN modem under Linux

Posted on 1997-08-01
1
326 Views
Last Modified: 2010-03-17
hello, i have a 3comimpact iq isdn modem, and i need to know
how to set this up under linux so that i can use both b channels.
so, the question is, how do i do that?
0
Comment
Question by:_null
1 Comment
 
LVL 3

Accepted Solution

by:
sauron earned 100 total points
ID: 1585806
It's really nothing to do with Linux. If the terminal adapter supports bonding, or Multilink PPP, it will be set in commands sent to the TA.

I have a BitSurfr Pro, and this supports both Multilink PPP, and bonding. Which I would use depends on where I'm dialing. In the case of Multilink PPP I sent an AT command prior to dialing. For a bonded call, I simply set the rate multiplier before dialing. All of these are features of the Terminal Adapter, and you'll have to check your manuals for the information that is specific to your TA.

As far as the Linux end goes, all you have to do is to get the program making the call to send the appropriate AT commands to the TA prior to dialing.
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
Attackers love to prey on accounts that have privileges. Reducing privileged accounts and protecting privileged accounts therefore is paramount. Users, groups, and service accounts need to be protected to help protect the entire Active Directory …

756 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question