Solved

Fatal exception 0e occurred at 0137:BFF9A07C

Posted on 1997-08-20
1
336 Views
Last Modified: 2013-12-29
When I use Netscape3.0 to view some sites, when I move the bar to view the follow pages.
My computer is hang.( Under win95 )
And showed me a bule screen with the following mesage:
"Fatal exception 0e occurred at 0137:BFF9A07C. The currnet
application will be terminated."
Then, I press "enter" and showed:
"An exception 0D has occurred at 0028.0000000B in VxD---.
This was called from 0028:C003F90 in Vxd NDIS (01)+00006698.
It  nay be pissible to contine normally."
then, I press "enter" and my computer will re-boot.
Please give my some methods to slove it??
Thank you very much.
0
Comment
Question by:95111072
1 Comment
 
LVL 14

Accepted Solution

by:
smeebud earned 20 total points
ID: 1694763
While the exception number may vary, 0E is the most common.
This error message can occur when Windows 95 encounters a problem while processing the system registry. If this error message occurs, the registry may be damaged.
RESOLUTION
To resolve this problem, restore your registry files from a backup. If you do not have a backup, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q131431
TITLE     : How to Troubleshoot Registry Errors
Personally I would
1. Check your system for viruses, Do and Full system, every check.
2. Uninstall, then reinstall Netscape 1st to see if that fixes the problem. if that does not work, then here is the article Q131431.
-------
IMPORTANT: This article contains information about editing the registry. Before you edit the registry,
you should first make a backup copy of the registry files (System.dat and User.dat). Both are hidden
files in the Windows folder.
SYMPTOMS
When you start Windows 95, you may receive one of the following error messages:
There is not enough memory to load the registry.
Windows has encountered an error accessing the system registry. You should restore the registry now and restart the computer.
If you ignore this error and shut down your system, you may lose data.

Restoring the registry replaces the faulty registry with a known good backup copy. However, this backup copy may not contain all the information recently added to your system.

NOTE: If you click the Restore From Backup And Restart button, you receive the error message again as Windows 95 restarts.

CAUSE

These error messages may occur if the registry is damaged.

RESOLUTION

WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to
reinstall Windows 95. Microsoft cannot guarantee that problems resulting from the incorrect use of
Registry Editor can be solved. Use Registry Editor at your own risk.

NOTE: For information about how to edit the registry, view the Changing Keys And Values online
Help topic in Registry Editor (Regedit.exe). Note that you should make a backup copy of the registry
files (System.dat and User.dat) before you edit the registry.

Perform the steps outlined in each method below (as needed) to restore a damaged registry.

Using Real-Mode Registry Editor

Use Registry Editor in real mode to export, then import, the registry file. To do so, follow these
steps:

1.Restart the computer. When you see the "Starting Windows 95" message, press the F8 key,
then choose "Safe mode command prompt only" from the Startup menu.

2.Type the following line to export the registry

regedit /l:<path1> /e <path2>system.txt

where <path1> is the path to the System.dat file and <path2> is the path to the destination
file. For example, if Windows 95 is installed in the Windows folder on drive C, type the
following line:

regedit /l:c:\windows\system.dat /e c:\system.txt

3.Type the following lines, pressing ENTER after each line:

cd\windows
attrib -s -h -r system.dat

4.Type the following line to rename the current registry file:

ren system.dat system.old

5.Type the following line to import the System.dat portion of the registry

regedit /l:<path1> /c <path2>system.txt

where <path1> is the path to the System.dat file and <path2> is the path containing the file to
import. For example, if Windows 95 is installed in the Windows folder on drive C and you want
to import the System.txt file from the root folder of drive C, type:

regedit /l:c:\windows\system.dat /c c:\system.txt

NOTE: If an "Unable to open registry" or "Error accessing the registry" error message is
displayed when you attempt to import the System.dat portion of the registry, please see the
following article in the Microsoft Knowledge Base for more information about the error
message:

ARTICLE-ID: Q132064

TITLE : Regedit May Not Be Able to Import Registry with Large Keys

6.Restart Windows 95 normally.

If the error continues to occur, follow these steps:

1.Restart the computer. When you see the "Starting Windows 95" message, press the F8 key,
and then choose "Safe mode command prompt only" from the Startup menu.

2.Type the following line to export the User.dat portion of the registry

regedit /r:<path1> /e <path2>user.txt

where <path1> is the path to the User.dat file and <path2> is the
path to the destination file. For example, if Windows 95 is
installed in the Windows folder on drive C, type the following line:

regedit /r:c:\windows\user.dat /e c:\user.txt

3.Type the following lines, pressing ENTER after each line:

cd\windows
attrib -s -h -r user.dat

4.Type the following line to rename the User.dat file:

ren user.dat user.old

5.Type the following line to import the User.dat portion of the registry

regedit /r:<path1> /c <path2>user.txt

where <path1> is the path to the User.dat file and <path2> is the path containing the file to
import. For example, if Windows 95 is installed in the Windows folder on drive C and you want
to import the User.txt file from the root folder of drive C, type:

regedit /r:c:\windows\user.dat /c c:\user.txt

NOTE: If an "Unable to open registry" or "Error accessing the registry" error message is
displayed when you attempt to import the User.dat portion of the registry, please see the
following article in the Microsoft Knowledge Base:

ARTICLE-ID: Q132064

TITLE : Regedit May Not Be Able to Import Registry with Large Keys

6.Restart Windows 95 normally.

For additional information about using Registry Editor in real mode, please see the following article in
the Microsoft Knowledge Base:

ARTICLE-ID: Q131352
TITLE     : Using Registry Editor in Real Mode


If the error continues to occur after you follow the steps in this section, please see the next section.

Using System.da0

Restore the registry to its state when you last successfully started Windows 95. To do so, follow
these steps:

1.Restart the computer. When you see the "Starting Windows 95" message, press the F8 key,
then choose "Safe mode command prompt only" from the Startup menu.

2.Type the following command to move to the Windows folder

cd \<windows>

where <windows> is the Windows 95 folder. For example, if Windows 95 is installed in the
Windows folder, type the following line:

cd \windows

3.Type the following line:

attrib -s -h -r system.dat

4.Type the following line:

ren system.dat system.bad

5.Restart your computer. Windows 95 uses the System.da0 file when it cannot find the
System.dat file. If this file works, Windows 95 renames it to System.dat.

If the error continues to occur after you follow the steps in this section, please see the next section.

Using System.1st

Restore the registry to its state when you first started Windows 95 successfully. To do so, follow
these steps:

1.Restart the computer. When you see the "Starting Windows 95" message, press the F8 key,
then choose "Safe mode command prompt only" from the Startup menu.

2.Type the following command to move to the Windows folder

cd \<windows>

where <windows> is the Windows 95 folder. For example, if Windows 95 is installed in the
Windows folder, type the following line:

cd \windows

3.Type the following line:

attrib -s -h -r system.dat

4.Type the following line:

ren system.dat system.xxx

5.Type the following line:

cd \

6.Type the following line:

attrib -s -h -r system.1st

7.Type the following line

copy system.1st c:\<windows>\system.dat

where <windows> is your Windows 95 folder.

8.Type the following line:

attrib +s +h +r system.1st

9.Restart your computer.

If the error continues to occur after you follow the steps in this section, please see the next section.

NOTE: You may find that your TrueType fonts are missing from the Fonts folder or in programs after
you follow the above steps. If this is the case, use the resolution listed in the following article in the
Microsoft Knowledge Base:

ARTICLE-ID: Q133732
TITLE     : Missing TrueType Fonts in Fonts Folder or Programs


Reinstalling Windows 95

Re-create the registry files by reinstalling Windows 95.

To do this, perform the following steps.

NOTE: If you cannot access the CD-ROM drive from the command prompt, consult the CD-ROM
drive's documentation or manufacturer for assistance with loading the real-mode drivers for the
CD-ROM drive.

1.Restart the computer. When you see the "Starting Windows 95" message, press the F8 key,
then choose Command Prompt Only from the Startup menu.

2.Type the following line and then press ENTER to remove all user profiles:

deltree c:\windows\profiles

3.Rename the existing registry files by typing the following lines. Press ENTER after each line:

cd \windows
attrib -s -h -r system.dat
ren system.dat system.xxx
attrib -s -h -r user.dat
ren user.dat user.xxx
attrib -s -h -r system.da0
ren system.da0 system.yyy
attrib -s -h -r user.da0
ren user.da0 user.yyy
cd \
attrib -s -h -r system.1st
ren system.1st system.zzz

4.Run Windows 95 Setup.
--------- Also I would backup my registry 1st:
WRPV3.ZIP is the Best Backup/Retsore I've Seen. http://www.webdev.net/orca/ Search WRP
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

The use of stolen credentials is a hot commodity this year allowing threat actors to move laterally within the network in order to avoid breach detection.
This is an article about Leadership and accepting and adapting to new challenges. It focuses mostly on upgrading to Windows 10.
This Micro Tutorial will give you a basic overview of Windows DVD Burner through its features and interface. This will be demonstrated using Windows 7 operating system.
The viewer will learn how to successfully create a multiboot device using the SARDU utility on Windows 7. Start the SARDU utility: Change the image directory to wherever you store your ISOs, this will prevent you from having 2 copies of an ISO wit…

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now