Solved

Changing domain name and UUCP configuration

Posted on 1997-08-31
1
182 Views
Last Modified: 2010-03-18
Howdy folks,

Our LINUX box checks the companies mail using UUCP. This is working. It's about to not work, however, because we are changing our domain name.

How to I change the domain name in LINUX, and how do I change the UUCP setup to reflect the change? The LINUX install is completely no-frills, and we are using the Taylor UUCP setup.

Thanks for your help!
Daniel
0
Comment
Question by:dannii
1 Comment
 
LVL 2

Accepted Solution

by:
nicademus earned 50 total points
ID: 1586367
If you have a no frills it should be easy, mind you which Distribution are you Using? Slakware, Redhat....?

I use Slakware and this is what I would do...
 
type       netconfig

this should, after going through a few questions set up your domain name, make sure you know all your IP addresses, and Name server addresses, etc. maybe print out the /etc/rc.d/rc.inet1 file to have a record of the IP addresses.  So when netconfig asks, you can give them.
      When the system next comes on line you should have a new domain name, Also this should, if your sendmail configuration is setup correctly, and Your Linux box reports it's domain name correctly, the sendmail daemon will also be automatically informed of the domain name change.
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
I get an error right after Fail2ban restart in Ubuntu 14.04 2 95
Exploits in Kali Linux 4 386
linux, squid, exchange 14 175
Linux : how to point the OS to use the new DNS server 11 104
I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…
This video shows how to use Hyena, from SystemTools Software, to bulk import 100 user accounts from an external text file. View in 1080p for best video quality.

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question