?
Solved

SparcStation 20 - IPX configuring

Posted on 1997-09-22
1
Medium Priority
?
307 Views
Last Modified: 2013-12-23
Is it possible to configure a SparcStation 20 with 2 network to the IPX
protocol?? (Solaris 2.4)

Station already have TCP protocol loaded and working. Can I configured 2nd
port to IPX?

If so how, and who do I need to be logged in as.

Thanks

Oscar

PS

NIS+ does not appear to be working correctly.  I cannot even figure out how
to start it, so I'm using /etc files to run the network.



0
Comment
Question by:oscar_ssent
1 Comment
 
LVL 4

Accepted Solution

by:
jlms earned 200 total points
ID: 1582595
You need a third party product, Solaris does not support IPX out of the box.

Check this products:
- SunPC from SunSoft
- SoftNet Client from Puzzle Systems Corporation
-PPS-1.0-P1 Connectivity Products: PC Integration SolarNet PC
Protocol Services 1.0

Check this url:

http://www-archive.stanford.edu/lists/sun-managers/hyper95/1027.html

For NIS+ you need to read about it, it is far too long and complicated to give you advice here, In principle if you didn't do anything to configure it then it is not working.
0

Featured Post

Concerto's Cloud Advisory Services

Want to avoid the missteps to gaining all the benefits of the cloud? Learn more about the different assessment options from our Cloud Advisory team.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
In this article, the configuration steps in Zabbix to monitor devices via SNMP will be discussed with some real examples on Cisco Router/Switch, Catalyst Switch, NAS Synology device.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

829 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question