lindsay092597
asked on
Intel 82430I M/B I.D
Got this Motherboard with PCIsets, SB82437FX-66 and PCIset SB82371FX chip sets .
Its got "Intel 82430I Ver :A" on the silk screen, and a Socket 7
Where would I get the Jumper setting for it?
Thanks.
Its got "Intel 82430I Ver :A" on the silk screen, and a Socket 7
Where would I get the Jumper setting for it?
Thanks.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
lindsay,
keep writing them, I've found you have to pester them sometimes but they usually come thru with a .PDF manual.
Good luck.
Check http://www.dejanews.com/home_ps.shtml
With the right search phrase you can find about anything.
keep writing them, I've found you have to pester them sometimes but they usually come thru with a .PDF manual.
Good luck.
Check http://www.dejanews.com/home_ps.shtml
With the right search phrase you can find about anything.
The data you require would appear to be at:
HTTP://WWW.FYI.COM.TW/DOWNLOAD.HTM
AT THE BOTTOM OF THE PAGE THERE IS A ZIP FILE CALLED 82430I PCI BUS. ZIP
I UNZIPPED IT AND IT CONTAINS ALL THE JUMPER SETTINGS FOR A 82430I MOTHERBOARD.
I HAVENT VERIFIED IT BUT IT DOES SEEM TO BE OK
REGARDS
BARRY
HTTP://WWW.FYI.COM.TW/DOWNLOAD.HTM
AT THE BOTTOM OF THE PAGE THERE IS A ZIP FILE CALLED 82430I PCI BUS. ZIP
I UNZIPPED IT AND IT CONTAINS ALL THE JUMPER SETTINGS FOR A 82430I MOTHERBOARD.
I HAVENT VERIFIED IT BUT IT DOES SEEM TO BE OK
REGARDS
BARRY
wENT TO THE SITE YOU SUGGESTED,
got manual for a couple of boards but they don't match up.
E-mailed the page owner a few weeks ago but as of yet no reply.
So I'm still trying!!
Thanks again for you help.
See ya!!!