Solved

Problem starting the requester

Posted on 1997-10-06
3
298 Views
Last Modified: 2013-12-23
I have mysterious problems trying to
start OS/2 Requester (I need to connect
to OS/2 LANserevr).

  Steps performed:
  - NetWare client upgraded to 2.12
    (I need also to connect to Novell
     servers)
  - FixPack 3 has been applied
    (I am using OS/2 v4)
  - Files/printer client (Peer)
    has been installed several days
    ago

   The requester (NET START REQ) fails
to start and exits after timeout. The
details of configuration may be supplied (I use NE2000-compatible
network adapter with NE2000-compatible
driver for OS/2). All checks
recommended for NET3060 error has
been made. No result.

  I need suggestions on what to do.
  Email mbo@ccphys.nsu.ru
0
Comment
Question by:MasterBo
  • 2
3 Comments
 
LVL 1

Expert Comment

by:sbufton
ID: 1558551
I need some more info on your setup, but from your description,
it sounds like you have the following:

1. You connect to Netware servers. This was setup first and is
working.
2. You have added the peer services.

In this case, check out your MPTS setup (may also be shown as
'adapters and protocol services'). What protocols do you have
connected to your adapter? You probably need to set up 'Netware
Netbios emulation' if you use Netware as your primary protocol.
I don't have any experience using this - I do it the other way
around, because I only occasionally need Netware services. I
think you will also need to re-install the netware configuration
(you can use your existing config. as the source directory) and
probably tell it to add Netbios emulation.


0
 

Author Comment

by:MasterBo
ID: 1558552
In fact, when I applied TCP/IP and MPTS
patches, the problem vanished. Thanks for
your comments, Sbufton, as you have
suggested several more ideas on how to
set up network services.

I suppose your assistance is worth the price I was offering.


0
 
LVL 1

Accepted Solution

by:
sbufton earned 100 total points
ID: 1558553
OK, glad to have been of assistance!
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Viber-Only Restriction 6 44
eigrp - not allow a subnet from advertising 1 38
How to calculate the netmask 5 55
Internet Service Provider 3 49
Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question