?
Solved

How to configure other users for Netscape?

Posted on 1997-10-09
2
Medium Priority
?
187 Views
Last Modified: 2010-03-18
 Hi,
    I have Netscape 3.0 for Slackware Linux.
  It shows the applets very well for user "root",
  where it was installed. For other users I can't see the    applets in Netscape. Ofcourse, the setting of CLASSPATH
  and PATH is the same setting like "root". What addition    set I have to do?
 
    Thanks,  klivlend.
0
Comment
Question by:klivlend
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 4

Accepted Solution

by:
jlms earned 100 total points
ID: 1586708
Check the installation directory and check that all the files have execution permission for every body, something like
rwxr-xr-x (755) should work.
0
 

Author Comment

by:klivlend
ID: 1586709
 Thanks jlms,

     I already solved the problem.
  It was found that the library gnumalloc.so
  must be installed in /lib and LD_PRELOAD
  must be assigned to this path. It's a known
  problem of Netscape 3.0 under Linux.
     Why it worked in the "root" user.
  I think, accidentally, since gnumalloc solves
  the allocation memory problem and  this is
  the possible case.

  Bye, klivlend

0

Featured Post

Optimum High-Definition Video Viewing and Control

The ATEN VM0404HA 4x4 4K HDMI Matrix Switch supports 4K resolutions of UHD (3840 x 2160) and DCI (4096 x 2160) with refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0). It is ideal for applications where the routing of 4K digital signals is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Suggested Courses
Course of the Month10 days, 8 hours left to enroll

765 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question