Solved

2 Network cards in the same machine/trust relationships

Posted on 1997-10-15
3
346 Views
Last Modified: 2013-12-23
I have an OS/2 Server.  Our network is laid out with an OS/2-based token-ring segment and an NT 4.0(SP3)-based Ethernet segment.  I am trying to get a token-ring card and an Ethernet card running in this machine.  I have the token-ring card set up (so far) as Adapter 1, and the Ethernet card as Adapter 0.  However, only one card will function--that card being the Ethernet card.  Any ideas?

That failing--is there a way to set up a trust relationship between the OS/2 domain and the NT domain?  If so, how is it done?
0
Comment
Question by:godmom
3 Comments
 
LVL 1

Accepted Solution

by:
sbufton earned 150 total points
ID: 1558554
Have you checked whether there is an IRQ
or I/O address conflict between the cards?

How have you determined that only one card
is working? Are you sure that you have the
required protocols bound to both cards?

As far as I am aware, there is no way to
set up a trust relationship between OS/2
and NT domains. You could try putting one
of the computers in the other's domain as
either a backup domain controller or
additional server, in which case the user
definitions should be taken from the
domain controller - but I have never tried
this, so it may not work.
0
 

Author Comment

by:godmom
ID: 1558555
I'd made sure there was no conflict in the I/O port or IRQ settings, and I checked the protocols.  It seems to work okay now, but of course there's still the problem with the trust relationship.  I think it's something in Microsoft's code: "When encountering OS/2 = barf".
0
 

Expert Comment

by:CTROSE
ID: 10371245
NT must be at sp 6a to work with OS/2
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
Internet Business Fax to Email Made Easy - With  eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, f…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

807 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question