Solved

NT4 and AMD PC-NETCARD, Registry Problem

Posted on 1997-11-06
1
647 Views
Last Modified: 2013-12-23

Hi!

I've got a Compaq Deskpro XL 560 with the Standard-AMD Networkcard
under NT4.0german (ServicePack3)

I've installed the net (10Mb Ethernet with TCP/IP) without getting any
error but:

During the boot, the system is telling me that I should take a look in
the event-sheduler (could be the wrong word, because I've got a german NT :).

There, I can read that an important parameter is missing concerning AMDPCN1.

Event-ID: 5011
Source: AMDPCN
Kind: Error

Bytes:
0000: 00 00 10 00 02 00 66 00   ......f.
0008: 00 00 00 00 93 13 00 c0   ....?..+
0010: 00 00 00 00 00 00 00 00   ........
0018: 00 00 00 00 00 00 00 00   ........
0020: 00 00 00 00 00 00 00 00   ........
0028: 02 00 00 00 07 00 00 00   ........
0030: 01 00 00 c0 15 00 00 00   ...+....

Words:
0000: 00100000 00660002 00000000 c0001393
0010: 00000000 00000000 00000000 00000000
0020: 00000000 00000000 00000002 00000007
0030: c0000001 00000015

So I searched in the registry for 1393, 13.93, 13 93 (found nothing) and 93
but I couldn't find anything concerning the network.
No c0001393 was there!

I installed twice: same problem
I deleted all network-services and cards (no more net installed) and
installed it again: same problem


What should I do?

Do you want the original EVT-file?

PS: With Win95, everything is fine on my system.


0
Comment
Question by:Voit
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 5

Accepted Solution

by:
heiko earned 100 total points
ID: 1567458
this problem looks like an installation with standard NT drivers for this adaptor. you should use drivers from SSD. please update with actual version from compaq.
sorry i dont know the exact SP-Number (SoftPaq number)

you can find all of this on ftp.compaq.com for descriptions go to "allfiles.html"

Good luck
Heiko
0

Featured Post

Supports up to 4K resolution!

The VS192 2-Port 4K DisplayPort Splitter is perfect for anyone who needs to send one source of DisplayPort high definition video to two or four DisplayPort displays. The VS192 can split and also expand DisplayPort audio/video signal on two or four DisplayPort monitors.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Have you ever set up your wireless router at home or in the office to find that you little pop-up bubble in the bottom right-hand corner of Windows read "IP Conflict - One of more computers on the network have been assigned the following IP address"…
Enterprise networks where VoIP phones have been deployed frequently use port configurations that allow both a computer and an IP phone to be plugged into the same switch port but use different VLANs. On Cisco equipment I'm referring to the "native V…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Suggested Courses
Course of the Month11 days, 11 hours left to enroll

623 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question