Configuring kernel for Aztech Sound Galaxy Pro 16
Posted on 1997-11-11
I having problems getting my Aztech Sound Galaxy Pro16 card
to work with Linux. This is not at pnp-card.
The card is configured as follows: "wave port base Address"
530, "SG/MIDI base address" 220, irq 7 and DMA 1.
In the system-resources of the control panel of Win95 I see
that appart from the addressed above, address 388 and
irq 11 are also used.
I don't find anything about that in the manual.
Reading howtos and old postings via dejanews I learned that
my card should work fine configuring the kernel for
I tried several (about 20 -- the compiling took ages on my
486 :-( ) configurations but I never had any Midi device
working. I also suspect my audio device (there is one if I
configure MSS with 530, 7) to use only 8 bit sound. I was
told that there should be 2 audio devices: one 8 and one
Who can help me to configure this card?