Solved

Create multiple print queues

Posted on 1997-12-04
3
556 Views
Last Modified: 2011-09-20
Hi,

I have a HP LaserJet 4 and a Fujisu dot matrix printer. Both of them are connected to a HP Jetdirect EX plus 3 print server. I want to assign different print queue names to these two printers, fox instance, PQ1 is connected to HP LaserJet 4 and PQ2 is connected to Fujisu printer. Do you have any idea?

I hope to hear your reply soon! Thanks!

nobel
0
Comment
Question by:ngpk
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
3 Comments
 
LVL 1

Expert Comment

by:lyon
ID: 2012264
Please provide a little more information and I will try to help further.
What type of network are you working on with these printers and the JetDirect? NT or Novell.
Based on what network you have I can suggest how you might setup multiple Print queues

Thanks
Lyon
0
 

Author Comment

by:ngpk
ID: 2012265
There are both NT Server and NetWare Server running on the Ethernet. I have a HP JetDirect EX Plus 3 that has 3 parallel ports. A HP LaserJet 4 is attached to port1 and a Fujisu dot matrix printer is attached to port 2. I want to create a network print queue called PQ1 that is connected to port 1 and another network print queue called PQ2 connected to port 2. Both NT Server and NetWare Server should be able to control these print queues. Any idea?
0
 
LVL 1

Accepted Solution

by:
jsouth earned 100 total points
ID: 2012266
When you are ready to print, in hte printer box just specify which printer you want to print to. It will atomatically queue it.
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you use a Brother DCP 130C or similar Brother printer, at some point you might encounter the following problem: after you change the ink cartridge, the printer displays an "ink empty" message. Sometimes you just need to follow the instructions…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…
How to Install VMware Tools in Red Hat Enterprise Linux 6.4 (RHEL 6.4) Step-by-Step Tutorial

751 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question