Solved

cant boot up in win95

Posted on 1997-12-09
2
222 Views
Last Modified: 2010-04-12
I have a NEC 9522 75 mhz pentium.  The colors on the screen started getting mixed up the night before, then today, when I tried to boot up, the machine goes to power saving mode, and when the message hit esc to exit or f2 to enter setup comes up, and I choose either one, the machine just locks up with a dark screen.  Could this be a video card gone bad?  I can't figure out a way to get into setup, where I wanted to disable the power saving mode.
Thanks,
Alan
0
Comment
Question by:wolfmtn
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 1

Accepted Solution

by:
ngpudding earned 0 total points
ID: 1120819
Maybe you can try running Win95 in Safe Mode by hitting the F8 key just after the beep sound during system boot-up. You should be able to enter Win95
0
 
LVL 1

Expert Comment

by:twexperts
ID: 1120820
Make sure the cable connections to the card are all ok. Then if the problem pursists, try and put the card into a different slot, if you can. If you can enter Windows, you can see if you can disable the card's power saving mode via the control panel's display control. Otherwise good luck....
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the modern office, employees tend to move around the workplace a lot more freely. Conferences, collaborative groups, flexible seating and working from home require a new level of mobility. Technology has not only changed the behavior and the expe…
This article shows how to use a free utility called 'Parkdale' to easily test the performance and benchmark any Hard Drive(s) installed in your computer. We also look at RAM Disks and their speed comparisons.
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
Add bar graphs to Access queries using Unicode block characters. Graphs appear on every record in the color you want. Give life to numbers. Hopes this gives you ideas on visualizing your data in new ways ~ Create a calculated field in a query: …
Suggested Courses

632 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question