• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 329
  • Last Modified:

AICK problem

I am having some trouble installing AICK onto a PowerPC.

The message that comes up after I try a Standard or Custom Install of the AICK from CD onto my hdd:

There is a problem with a disk you are installing onto. No installation can take place. Try installing onto another disk.

The problem of course is that I only have 1 hard drive.

Any help would be greatly appreciated.
0
smullen
Asked:
smullen
1 Solution
 
ipierceCommented:
Umm, is your hard drive getting full?  AICK is a big package.  I think you need about 15megs free to install it.

Is it an apple disk?  If so, what does Disk First Aid have to say.  There may be some physical/data problem with the drive.  Try running Norton when Disk First Aid tells you there are probelms on this disk that Disk First Aid can't fix.
0
 
TefreCommented:
If there really was a serious problem with your hard disk I believe you would have experienced other difficulties as well. But since you have not mentioned it, your hard disk may be just fine. It is more likely there is a fault with the installer on the CD-rom or the CD rom itself. You should opt for a replacement at your dealer. Or at least, first try to install something else to see if that works.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now