Solved

TN3270 via dial-up?

Posted on 1997-12-19
3
288 Views
Last Modified: 2013-12-23
I need to run TN3270 on OS/2 Warp 4 via dial-up TCP/IP.  The TN3270 client that comes with Personal Communications 4.1 (entry level) is great, but will it work via dial-up? If so, how? If not, is there another TN3270 client that will work under OS/2 over dial-up?
0
Comment
Question by:shumway
  • 2
3 Comments
 
LVL 12

Accepted Solution

by:
Otta earned 200 total points
ID: 1558569
Everything should work correctly -- it works for me.

The TCP/IP packets generated/received by the TN3270 application
are "carried" over the telephone-line by either
of the SLIP or PPP protocols, whichever your ISP supports.
(I assume that your ISP *DOES* support at least one of these protocols; if not, then switch to an ISP which does!)

It's all a matter of layers:
TN3270 on top of TCP/IP on top of SLIP (or PPP)
on top of the physical-connection.
0
 
LVL 12

Expert Comment

by:Otta
ID: 1558570
Please "grade" the answer.  Thanks.
0
 

Author Comment

by:shumway
ID: 1558571
So it does!  I was confused by the configuration dialog box that only showed "LAN" as an adapter choice.   Unfortunately, I still can't get through, as I have to be authenticated by the firewall before I'm allowed access to the host.  All I get back is an "X PROG750" from the firewall.  I wish there was a userexit available for me to work in the firewall authentication procedure before the client starts looking for a 3270 data stream.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
f5 Persistence 14 62
Unmanaged Switches for Optimized Network Speeds 7 50
Internet link load balancer 6 67
Splitting network into several individual networks. 6 47
ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question