Solved

IP address

Posted on 1998-02-05
3
213 Views
Last Modified: 2013-12-23
UNIXer,

Actually, I have a LAN with two machines, a Solaris X86 (never use dialup networking) and a WinNT (use dialup networking by PPP). Which IP address is the best for assigning the Solaris X86 machines? Can I use the IP address which I use in office as it is not the ISP I use (not within the domain of the ISP)?

What is loopback address?

Andrew
0
Comment
Question by:andrewyu
  • 2
3 Comments
 
LVL 1

Accepted Solution

by:
hwillekens earned 0 total points
ID: 1583127
You could try to install MS Proxy server and Assign both machines to the same network eg 192.168.0.1 and 192.168.0.2. when your PP P link is up, all http and ftp will go through proxy.

Loopback is always 127.0.0.1 as far as I know
0
 

Author Comment

by:andrewyu
ID: 1583128
What is loopback address ??????
0
 

Author Comment

by:andrewyu
ID: 1583129
I am using Windows NT Workstation, but not Windows NT Server !
So, I think I cannot install the proxy server !

And can I assign the IP addres that I used in office as they never turn on at the same time ?

Andrew
0

Featured Post

Maximize Your Threat Intelligence Reporting

Reporting is one of the most important and least talked about aspects of a world-class threat intelligence program. Here’s how to do it right.

Join & Write a Comment

Suggested Solutions

The DSL Parameters part of this article is valid and can be considered with any brand of internet router and modem (Dlink, 3com, Alcatel, Usrobotics, Parks), by accessing the configuration interface available by the manufacturer eg: http://10.1.1.1 …
ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now