TCP/IP routing

We have a 4.11 server that has a token ring nic and an ethernet nic card in it. IPX routes between the cards fine, but I can't get TCP/IP to. I have TCP/IP bound to both cards. I can ping the token ring nic from the token ring network, and the ethernet nic from the ethernet network, but can't get from one network to the other. I have forwarding on. Could this have something to do with subnet masking? The token ring nic has address 200.111.102.50 and the ethernet nic has address 200.111.101.1 The subnet mask for both is 255.255.255.0 I admit that I don't yet understand the concept of subnet masking. BTW these networks are not connected to the internet so you don't have to worry about legal addresses.
Thanks

hage1Asked:
Who is Participating?
 
evil_edConnect With a Mentor Commented:
Hi Hage 1...

You have forwarding enabled .. ?? how

I have the same setup, and i could even ping both cards from the console using ping.nlm
it turned out that i forgot to add the forward=yes to the load tcpip command.

So start with the LOAD TCPIP FORWARD=YES and it should work.
subnetting is easily checked with a tool provided by Novell, it's a subnetmask calculator.

good luck .. eddie
0
All Courses

From novice to tech pro — start learning today.