Network Adapter (Intel eepro10+ EISA) detection problems

I have an Intel EtherExpress Pro10+ EISA card and can get neither slackware nor RedHat5.0 to find it.  SolarisX86 finds it no problem (even with p&p enabled).  I read in the Ethernet-HOWTO that this card uses the PRO100B driver rather that the PRO10 driver, but it suggests that this is only a PCI driver.  The HOWTO says that the PRO10+ is suported, but is the EISA version supported?
JohnHeywoodAsked:
Who is Participating?
 
duxConnect With a Mentor Commented:
You can find information about your cadrd, and drivers also at the following address:
http://titan.informatik.uni-bonn.de/~canavan/
0
 
JohnHeywoodAuthor Commented:
Adjusted points to 300
0
 
JohnHeywoodAuthor Commented:
I know this is hard, It's given me enough of a brain strain, so here, have some more incentive.
0
Keep up with what's happening at Experts Exchange!

Sign up to receive Decoded, a new monthly digest with product updates, feature release info, continuing education opportunities, and more.

 
hfCommented:
Have you tried one of the generic drivers like the ne2000 ?
0
 
JohnHeywoodAuthor Commented:
I have tried NE2000 support in the kernel as well, but the card still isn't detected at boot up.  I tried starting an NFS install from my boot disks to see if it could find the network adaptor then, but it couldn't find it then either.
0
 
JohnHeywoodAuthor Commented:
Cheers Dux
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.