Solved

PPP connection

Posted on 1998-04-28
4
247 Views
Last Modified: 2010-03-18
Hi,
I have just setup a debian system, and have the base components installed. Now I want a ppp connection? How would I go about doing this?? I have a 56K flex modem by KTX on Com2... I would like to use the web through linux and irc and have some servers running such as apache and an irc server aswell, can someone guide me along with setting this up???  The best way>???

0
Comment
Question by:nigem
  • 2
4 Comments
 
LVL 2

Expert Comment

by:wk
ID: 1584102
First of all, you should read the PPP howto.
0
 

Author Comment

by:nigem
ID: 1584103
can someone tell me where it is, as I only insrtalled the basesystem and it didn't inmstall a ppp how to. Can someone point me in the direction????
0
 

Accepted Solution

by:
mr_cat earned 20 total points
ID: 1584104
You will want the following document from the Web:
     ppp-how-to   from  www.interweft.com.au/other/ppp-howto/ppp-howto.html
     ppp-FAQ      from   www.interweft.com.au/other/ppp-faq/PPP-FAQ.html
It is possible to find it from a mirror site closer to home.
It contains about forty pages of info on PPP from setup, to networking, to connecting with a local computer via  with a null-modem cable.  If you are trying to establish connection with an Internet Service Provider (ISP), you will also want
     ISP-Hookup  from  www.gslis.utexas.edu/mirrors/LDP/HOWTO/ISP-Hookup-HOWTO.html
0
 

Author Comment

by:nigem
ID: 1584105
Thankyou very much, I'll give it a go....
0

Featured Post

Master Your Team's Linux and Cloud Stack!

The average business loses $13.5M per year to ineffective training (per 1,000 employees). Keep ahead of the competition and combine in-person quality with online cost and flexibility by training with Linux Academy.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
In a recent question (https://www.experts-exchange.com/questions/29004105/Run-AutoHotkey-script-directly-from-Notepad.html) here at Experts Exchange, a member asked how to run an AutoHotkey script (.AHK) directly from Notepad++ (aka NPP). This video…

789 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question