• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 237
  • Last Modified:

NetWare 3.12 error

I am trying to setup a 3.12 server and I am getting this error. Anyone know what it is and why after I get this error my entire server locks up? Error (1.1.141 Secondary Interrupt controller detected a lost hardware Interrupt). My system is a Pentium 90. I am using a 3c905 and a 3c509 NIC's.  
0
scotte
Asked:
scotte
  • 2
1 Solution
 
amarkoCommented:
Scotte,
           Just a thought here since I am not too good with Netware 3.12:  Are the two NICs conflicting with one another?  Perhaps they are trying to access the same IRQ?  I think the first thing I would try is to load only one NIC driver at a time to find out the exactly where the server locks up.  Hope that helps.
0
 
scotteAuthor Commented:
Thanks, but that didn't work...I unloaded the 3c509 card (It isn't the card on the LAN backbone) I guess the problem is with the 3c905 card (I am just not sure what the problem is yet)

Just a little more info:

The system comes up and runs fine until I try and log in thru a workstation and access anything. As soon as I try and access a file I get the same error (see above). Any other suggestions.....
0
 
JBirkmannCommented:
I guess one of NICs or another component of your server is using IRQ 15;

Under Netware you shouldn´t (mustn´t) use IRQ 15, this IRQ is using by Netware for Error Signaling!
0
 
scotteAuthor Commented:
That was it. The 3c905 card WAS setup with IRQ 15. I moved it and setup as IRQ 9 and everything seems to be working. Thanks for your help.
0

Featured Post

Receive 1:1 tech help

Solve your biggest tech problems alongside global tech experts with 1:1 help.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now