Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

USR Sportster modem config for ISP

Posted on 1998-06-19
1
Medium Priority
?
363 Views
Last Modified: 2010-03-18
I have had problems getting my modem setup on my Linux machine.  Is there anyway I could test if it is working
properly or not.  I try to connect  to my ISP and once
the pppd daemon starts it dies with an tcgetattr I/O error.

I have an internal Mwave modem (which is crap, and useless
for Linux), but I am using a USR Sportster 1440 Vbis external modem.  Could it be a conflict in ports or addresses?

Should I use minicom or kermit to test my connection?


Thanks in advance for your help

Mark
0
Comment
Question by:mgodard
1 Comment
 
LVL 1

Accepted Solution

by:
Sieger earned 200 total points
ID: 1584574
What COMs are the 2 modems using?  Make sure they are not in conflict.

minicom will be nice to test.  just dial and login to your ISP.  then quit with reset and
try do pppd manually.
0

Featured Post

Ask an Anonymous Question!

Don't feel intimidated by what you don't know. Ask your question anonymously. It's easy! Learn more and upgrade.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Look below the covers at a subform control , and the form that is inside it. Explore properties and see how easy it is to aggregate, get statistics, and synchronize results for your data. A Microsoft Access subform is used to show relevant calcul…

972 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question