MICROTEK SCANNER V310

I have Microtek scanner V310….I have successfully installed " Microtek Parallel Port Host Adapter " but in
Device Manager there is a question mark under Unknown Device and mentioning " Scanner 300A4 "….
Parallel port base address is 378 and EPP….IRQ 7….please help me out……what to do…..
I have tried so many times….one thing more that Printer " HP 870Cxi" is also attached……..printer is printing fine….it means the port is ok……Need Help........
Adnan060298Asked:
Who is Participating?

[Webinar] Streamline your web hosting managementRegister Today

x
 
waynebConnect With a Mentor Commented:
Try using the scanner without the printer attached, attach the scanner directly to printer port, you will always have a problem with hp deskjet sharing printer port.  If what I say works then you will have to add a second printer port to your pc and have the printer on one card and the scanner on the other card.  No work around exsists for this problem.
0
 
waynebCommented:
One more thing you will have to reboot once you hook scanner up to the printer port.
0
All Courses

From novice to tech pro — start learning today.