• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 258
  • Last Modified:

Not getting the full bps when connecting via RAS

I have a Multimodem MT1932ZDX capable of 19,200 bps installed on our RAS server.  I am using a Psion Dacom Gold card Global 56k PCMCIA modem to connect to our RAS server but cannot get above 14,400 bps. Any ideas of how to get the full bandwidth?
0
omb
Asked:
omb
1 Solution
 
henckensCommented:
The connection speed of 19k2 is mostly vendor dependant, it was never a standard at ITU-T.  Since every vendor created it's own version it is not compatible with other vendors.  You have to use a second multimodem (maybe even the same type) to use that speed.
0
 
ombAuthor Commented:
Thanks for your advice
0

Featured Post

Will You Be GDPR Compliant by 5/28/2018?

GDPR? That's a regulation for the European Union. But, if you collect data from customers or employees within the EU, then you need to know about GDPR and make sure your organization is compliant by May 2018. Check out our preparation checklist to make sure you're on track today!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now