MAXTOR 7131AT

Can anyone tell me the correct jumper setting for using the 7131AT drive as the master and another drive as the slave.
Have been to maxtor homepage only the 7131A is listed and those setting don't seem to work. There also seem to be 3 possible cmos settings??
Sorry this appears to be 2 questions

Thanks

irelandoneAsked:
Who is Participating?
 
rmarottaConnect With a Mentor Commented:
It appears that J-20 is to be jumpered for either master or master with slave present.
Some of the older IDE drives will not operate together with certain others.
You can find info for both drives here:

http://www.blue-planet.com/tech/no-frames.html

Let me know if you need more.

Regards,
Ralph
0
 
irelandoneAuthor Commented:
Ralph Thanks for the speedy reply.  I was able to get that from maxtors homepage.
I guess that the AT ver is no different and that perhaps that drive is one of the older ones that doesn't like talking to different drives.

Thanks again

Tom
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.