Solved

CD ROM not recognized

Posted on 1998-07-27
5
380 Views
Last Modified: 2008-03-10
We have a Packard Bell Model LEGEND 1956 Supreme MM   ORIGINAL EQ
INCLUDED
Manufacturer’s # 840665106   Serial # L043013917+
Hard Drive format number 555340.scr
CPU  486-DX2   SPEED 50Mhz  RAM 4MB (added more later) Videa Mem 512 KB
Cache Memory 8 KB  HARD DRIVE CFS420A  Type USER DEF1
CYL 826   HD 16    Pre 0   LZ 0  ec 63
1.44 MB, 3-1/2”, set on A:
PBCDCR-563 CD ROM, Set on drive D:
PB24DBF MODEN FAX S/R, On Com1 IRQ4
TAPE DRIVE:  Conner 51250Q
HARD DRIVE: 426.3 MB, Set on C:
Mouse Type:  PS/2
Sound Card:  forte-16

Our Packard Bell computer, using 3.1, is not recognizing the CD ROM, i.e. we cannot
boot. The CD ROM was replaced and worked fine for a period of time.  Recently it has
quit booting and we are getting this message.
bad or missing C:\forte16\drives\cdmke.sys
error in config.sys line 11
device driver not found: ‘MSCD0001’.
No valid cdrom device drivers selected

The number on the top of the CD ROM inside the unit is #BPCS730011
or BPC5730011
The old CD ROM may have had a different number.  How do we get the computer,
through 3.1  to recognize this CD ROM for use? Please give answer for use with 3.1.
Please reply to dpn1460@aol.com
There is a driver because the CD ROM worked last week. We dont know how to name or find the driver or CD ROM
Thanks
0
Comment
Question by:porfidio
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 

Author Comment

by:porfidio
ID: 1121722
Edited text of question
0
 
LVL 8

Expert Comment

by:wayneb
ID: 1121723
Did a driver come with the new cdrom?  You will need this driver in order to make this new cdrom work.
0
 

Author Comment

by:porfidio
ID: 1121724
Edited text of question
0
 
LVL 8

Accepted Solution

by:
wayneb earned 50 total points
ID: 1121725
I will be sending you the cd-rom driver files via email, simply click on the file and it will self extract, once it does run Install and it should then enable your cdrom for windows 3.1 and dos.
Good Luck
0
 

Author Comment

by:porfidio
ID: 1121726
Please send Email again with download.  I deleted it by mistake. Sorry! Thanks a million! Actually the problem is not on this computer.  It is one my daughter is using. Can I still copy the info and transport it to that computer? I really dont know how this point system works, but I will give you what I have.

0

Featured Post

Salesforce Made Easy to Use

On-screen guidance at the moment of need enables you & your employees to focus on the core, you can now boost your adoption rates swiftly and simply with one easy tool.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Rasberry PI is a low cost piece of hardware that you can have a lot of fun with through experimenting and building/working on projects like media players, running a low cost computer, build data loggers etc. - see: https://www.raspberrypi.org
this article is a guided solution for most of the common server issues in server hardware tasks we are facing in our routine job works. the topics in the following article covered are, 1) dell hardware raidlevel (Perc) 2) adding HDD 3) how t…
In this video we outline the Physical Segments view of NetCrunch network monitor. By following this brief how-to video, you will be able to learn how NetCrunch visualizes your network, how granular is the information collected, as well as where to f…
If you’ve ever visited a web page and noticed a cool font that you really liked the look of, but couldn’t figure out which font it was so that you could use it for your own work, then this video is for you! In this Micro Tutorial, you'll learn yo…

695 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question