Solved

Overclocking

Posted on 1998-07-27
2
311 Views
Last Modified: 2010-04-26
I overclocked my bus frequency to 75Mhz so the p2 233 runs at 262 (also tried 83Mhz - 291Mhz)
I was wondering under wich condition it might damage the cpu and if i could try 83Mhz safely. I also wanna know
if it could damage other components.
here's a description of my computer
-Asus MB P2L97 acpi bios revision 1001 (4/21/98)
-75mhz bus clock
-P2 233mhz  (262)
-128M ram
-Seagate medalist pro 9140 ultra ata (primary master)
-acer 32x cdrom (primary slave)
-HP 7200i cdr (secondary master)
-creative dxr2 dvd-rom (secondary slave)
-pci mpeg decoder board for dxr2
-agp ati all in wonder pro 8M
-isa sbawe64 gold
-isa winmodem 28.8 (x2 drivers installed)
-D-link pci ethernet card
Run win 98 build 4.10.1998 msplus98

The points will be awarded to the experts that gives me the most complete answer for both overclocking to 83 and what damage might result (url welcomed )

Thanx
0
Comment
Question by:spacebrain
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 7

Accepted Solution

by:
dankh earned 40 total points
ID: 1121730
Hi,

   You asked for a URL about clocking.  This is the best one out there.  Enjoy:

http://www2.tomshardware.com/overclock.html
0
 
LVL 1

Author Comment

by:spacebrain
ID: 1121731
lots of reading but found what i needed
thanx
0

Featured Post

Visualize your virtual and backup environments

Create well-organized and polished visualizations of your virtual and backup environments when planning VMware vSphere, Microsoft Hyper-V or Veeam deployments. It helps you to gain better visibility and valuable business insights.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

this article is a guided solution for most of the common server issues in server hardware tasks we are facing in our routine job works. the topics in the following article covered are, 1) dell hardware raidlevel (Perc) 2) adding HDD 3) how t…
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …
This is my first video review of Microsoft Bookings, I will be doing a part two with a bit more information, but wanted to get this out to you folks.

615 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question