Solved

g100 productiva and fic503+ motherboard

Posted on 1998-08-19
7
328 Views
Last Modified: 2010-04-27
Does anyone know whether the above combo would work. I've seen descriptions of the card as an agp/atx card. I have a baby at motherboard with an at power supply. Would the card work ok and is it ok with an orchid righteous 3dfx card.
0
Comment
Question by:dogberry
  • 4
  • 2
7 Comments
 
LVL 5

Expert Comment

by:theh95
ID: 1123226
If your motherboard did not have the slot for agp/atx card, do not try to install the device to any other ISA or PCI slot.  agp/atx device is only work with the motherboard that could support it.

0
 

Expert Comment

by:second
ID: 1123227
The Vic 503+ is a AGP board. It should run fine with the G100. I don't know what can mean that atx in a video card requirements but try at find out (put your G100 in the rightest slot (AGP) of your board)

You should not accept a answer until your problem is gone. So if a proposed answer does not help you completly don't accept it. Just select 'reopen question for other experts'
0
 

Author Comment

by:dogberry
ID: 1123228
I know its an agp card. All I want to know before I fork out the wedge is will it work with my M/B. Has anyone tried it?
Thanks
0
Control application downtime with dependency maps

Visualize the interdependencies between application components better with Applications Manager's automated application discovery and dependency mapping feature. Resolve performance issues faster by quickly isolating problematic components.

 

Accepted Solution

by:
second earned 50 total points
ID: 1123229
Yes, it will work. (the G100 and the 503+)
0
 

Author Comment

by:dogberry
ID: 1123230
second, how do you know?
is the g200 a good combo with the orchid righteous 3dfx card version 1
an explanation will get you all the points

0
 

Expert Comment

by:second
ID: 1123231
G200 (not G100) is the BEST QUALITY (not speed) 3D (one of the bestest 2D) card on the market. The speed is VERY GOOD too. A G200 Millenium (or even Mystique) don't need a add-on 3Dfx card, it will only scrap the image quality. I think that is the best video card at current moment. Only the ATI All-in-Wonder Pro is better in category 'extras' - TV input+Teletext (TV Output can be found on some G200, and the G200 supports DVD)
The only cards wich will be good to add to the G200 could be a 2xVooDoo2 card (one card with two chips running in SLI, both chips with 12MB each = 2x12=24MB, but you will ocupy your only one full lenght PCI slot - that is the reason to use 2xVooDoo2 card instead of 2cards with one chip - the 503+ don't have two full lenght slots). and a PCI TV Tuner+Teletext+Radio card.
0
 

Expert Comment

by:second
ID: 1123232
You have choosen very good products to buy - the best overclocker Socket7 board, the best video card,..... buy a K6-2/333 - the best CPU and run it at 3x112(336) or 2.5x124(310)
0

Featured Post

Control application downtime with dependency maps

Visualize the interdependencies between application components better with Applications Manager's automated application discovery and dependency mapping feature. Resolve performance issues faster by quickly isolating problematic components.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

this article is a guided solution for most of the common server issues in server hardware tasks we are facing in our routine job works. the topics in the following article covered are, 1) dell hardware raidlevel (Perc) 2) adding HDD 3) how t…
A clone is a duplicate copy. Sheep have been cloned and maybe someday even people will be cloned, but disk cloning (performed by the hard drive cloning software) is a vital tool used to manage and protect data. Let’s look at what hard drive cloning …
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
When you create an app prototype with Adobe XD, you can insert system screens -- sharing or Control Center, for example -- with just a few clicks. This video shows you how. You can take the full course on Experts Exchange at http://bit.ly/XDcourse.

914 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

23 Experts available now in Live!

Get 1:1 Help Now