Solved

H/w for ATM Lan.

Posted on 1998-09-02
5
252 Views
Last Modified: 2010-04-26
What is the hardware required for establishing an ATM Lan.
Tell me the use of each required hardware item. Which multiplexing is used by ATM.
0
Comment
Question by:ritua
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 

Author Comment

by:ritua
ID: 1124247
Edited text of question
0
 

Author Comment

by:ritua
ID: 1124248
Please answer it immediately. It's URGENT.
0
 
LVL 32

Expert Comment

by:jhance
ID: 1124249
This question can't be answered based on what you provided here.  ATM is a technology and not a service that can be purchased.  Different service providers have different "flavors" of ATM and different equipment will be necessary.  I'd suggest contacting your service vendor of choice and getting their recommendation on equipment.  You might also want to consider letting them provide and install the equipment since you seem to be new to this.
0
 

Author Comment

by:ritua
ID: 1124250
jhance, I don't know much about ATM but I would like you to tell me about the H/w used in establishing a Lan that will be using ATM protocol. Is there anything special which is required by the Lan in this case? If yes, for which purpose will it be used.
0
 
LVL 32

Accepted Solution

by:
jhance earned 100 total points
ID: 1124251
The HW used for an ATM hookup is the same as that for a "regular" network hookup.  All that might be different is ensuring that you use a router that supports ATM. So normally you might have three different pieces of equipment installed.  First, a CSU/DSU that handles the interface from the incoming telco service (say a fractional T1 or whatever) and converts the data to digital for the router.  Then it goes to the router (CISCO, Bay Networks, etc.).  Out of the router comes your Ethernet and this usually goes to a hub or switch/hub.
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the modern office, employees tend to move around the workplace a lot more freely. Conferences, collaborative groups, flexible seating and working from home require a new level of mobility. Technology has not only changed the behavior and the expe…
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

691 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question