[Okta Webinar] Learn how to a build a cloud-first strategyRegister Now

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 258
  • Last Modified:

USB Support& Set Up

I have a PCI bus mainboard and it has USB support. My problem is there is no connector to the board that I can see although there is a 10 pin USB Jumper on the board. What will I need to hook up a USB device to the board. The board is a P54/55 supported board with a 430hx chipset. I hope this info will help.
0
nellie
Asked:
nellie
1 Solution
 
cmcgeeCommented:
Some boards have a riser card that slides between the PCI and EISA slots. Most decent Computer hardware stord should have either the riser cards (Some Tyans) or the USB connectors for around 20$. Frys Electronics has then here in Texas.

Check your bootup Bios # at Wims Bios to get the exact Motherboard info ( http://www.ping.be/bios/ ) There should be a link to the manufacturer of the board and you should be able to check whether it uses a riser card or the USB connectors.
0
 
nellieAuthor Commented:
From what I can tell there is no place for a riser card. Would it be ok to put in a seperate USB card and go from there.My bios supports USB. I don't know how to set up a USB card but i'm sure it's not that hard.
0

Featured Post

A Cyber Security RX to Protect Your Organization

Join us on December 13th for a webinar to learn how medical providers can defend against malware with a cyber security "Rx" that supports a healthy technology adoption plan for every healthcare organization.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now