Solved

rockwell driver 56k download

Posted on 1998-09-08
4
1,458 Views
Last Modified: 2013-12-27
Where can I download the driver for a Rockwell 56k internal voice fax modem? If you need more info I can open the computer and read the board.
P.S. I quickly checked the Rockwell site and did'nt see anything.
0
Comment
Question by:bryan_kay
  • 2
4 Comments
 
LVL 1

Accepted Solution

by:
semontgomery earned 70 total points
ID: 1144881
Bryan_Kay,

Try the following site.  I'm not sure which O/S you are using or Model of Modem.  So you will have to select the correct driver for your modem.

http://www.rss.rockwell.com/techinfo/pc/resource_files/win95modem.html

Good Luck,
Scott
P.S. If this does not work, open the computer and post the info on the modem and operating system you are using.
0
 

Author Comment

by:bryan_kay
ID: 1144882
I am using the win95 O/S. It is hard to determine which model I have. The numbers on the central chip are RCVDL56ACF/SP,
R6761-21, Rockwell97, 9725 B38830-4.
0
 
LVL 1

Expert Comment

by:semontgomery
ID: 1144883
Bryan_Kay,

I would start with the V.34 modem.  If that does not work, go down the list of drivers from the above site.

Scott
0
 

Expert Comment

by:CyberTron
ID: 1144884
Try this to find the exact drivers.  Take the FCC ID# and query the FCC for the actual manufacturer of the product.  I do this all the time when I need drivers and don't know who made the product because it is generic.  The first 3 CHARACTERS of the id will tell you who made the product.

http://www.fcc.gov/oet/fccid/  <new site>
or
http://www.fcc.gov/fcc-bin/ead  <old site>

Tron
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

The following recovery method will work on All Cisco Switchs that run ISO software. You will need a good copy of the IOS version you want you use saved on your PC and a Com's Cable. The software for these switches comes as a .tar file. Tar is …
Hello All, I have been training on Multicast for a while now and whenever I start the topic , I find out that my friends /  Colleagues mention that they do not know how to test Multicast Joins. As most of the multicast would be video traffic and …
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.

758 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now