Solved

Monitor color problems

Posted on 1998-09-12
3
199 Views
Last Modified: 2010-04-27
I have an Apple Multi-scan monitor.  When I first turn it on or wake it up from sleep mode, it has a very yellow hue to it.  As it warms up, it begins blinking to the correct color.  After 15 minutes, it is fine.  Any ideas?
0
Comment
Question by:Quackerback
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 32

Accepted Solution

by:
jhance earned 50 total points
ID: 1125032
Some of the components in it are slowing failing.  In this case, the red circuitry is lagging the green and blue.  If it a new   monitor, get it fixed/replaced under warranty.  If it's older, leave it alone until it dies and then replace it.  Monitor repairs out of warranty are usually quite expensive.
0
 

Author Comment

by:Quackerback
ID: 1125033
Not what I wanted to hear but what I expected.  thanks.
0
 
LVL 32

Expert Comment

by:jhance
ID: 1125034
I've had a monitor doing the same thing for years now.  I just leave it on all the time and never notice it unless there's a power failure or something.
0

Featured Post

Revamp Your Training Process

Drastically shorten your training time with WalkMe's advanced online training solution that Guides your trainees to action.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Does your iMac really need a hardware upgrade? Will upgrading RAM speed-up your computer? If yes, then how can you proceed? Upgrading RAM in your iMac is not as simple as it may seem. This article will help you in getting and installing right RA…
What do we know about Legacy Video Conferencing? - Full IT support needed! - Complicated systems at outrageous prices! - Intense training required! Highfive believes we need to embrace a new alternative.
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question