Solved

AMD K6-2

Posted on 1998-09-18
19
378 Views
Last Modified: 2010-04-27
What are the clock multipliers(1.5x,2x,...) supported by K6-2 266,300,333,350? I know that the K6-2 300 support 3x100, 4.5x66 and maybe 3.5x,4x ...
What are the I/O voltages of K6-2 333,350? I know that K6-2 266, 300 have 3.3I/O and that K6(-1) 300 3.45I/O ...
0
Comment
Question by:second
  • 9
  • 5
  • 3
  • +2
19 Comments
 
LVL 3

Expert Comment

by:gward28
Comment Utility
k6 2 266 4.0x k6 2 300 4.5x sorry this is what I had in front of
me if not answered buy the time I get to work I'll
come back and give you the rest .
0
 
LVL 1

Expert Comment

by:jimat
Comment Utility
only 4 points?
doesn't this put this question in the "it has to answer itself" catagory
0
 
LVL 2

Accepted Solution

by:
bushhead earned 0 total points
Comment Utility
as far as i know, they don't have to 'support' any particular multiplier speed. i think they run at a bus speed of 66 or 83 or 100 depending on your ram and motherboard, and after that it's just the clock multiplier which brings it up to speed. of course a faster bus speed is more desiarable than a higher clock multiplier. there is probably a limit on bus speed of 100 mhz.

with regards to the voltages, go to http://www.amd.com/K6/k6docs/ and you might find stuff there which u like..

bush
0
 
LVL 2

Expert Comment

by:bushhead
Comment Utility
ahaha. didn't see that it was only 4 points.

anyways, the right answers are ALL here
http://www.amd.com/products/cpg/tips.html

bush
0
 

Author Comment

by:second
Comment Utility
Hey guys, I didn't have a much more points................I can't buy points so................how much points do you think I musted give for that question? I don't understand that 'poins-wanting' :). These expert points that are becomed when answered a qusetion are useless :) Why anyone want more and more? When I answer some question I don't care for the points ....
------------------------------------------------------------------------------------
Let's say the 'voltage qst.' with other words: why is the core of K6(-1) 233 3.2V instead of 2.9 and why is the I/O of K6(-1) 300 3.45V instead of 3.3?

10x gward28, I will wait ...
0
 
LVL 2

Expert Comment

by:bushhead
Comment Utility
hehe.. firstly, i'm not squibbling about points. just that usually people give more points. i guess cos collecting points makes one look better. more points = more respected expert :)

with regards to voltage, 3.45 displayed on the bios is not really 3.45, it's just a rough guide. motherboards do not give out voltage as accurately as you think and there can actually be quite a great fluctuation! sometimes people increase voltage when they overclock, but thats not in question bound.

as to how come they require different voltages, it's probably just because of the way that the chip is designed. if you really wanted the answer, just write to the technical support at amd, they're quite nice people and will gladly answer your question much better than the people here can (unless they work at amd :))

bush
0
 
LVL 3

Expert Comment

by:gward28
Comment Utility
I won't be there till monday.
this sounds like your trying to upgrade your pentium mainboard
is this correct?

jimat have some class.points or no points.
0
 
LVL 3

Expert Comment

by:gward28
Comment Utility
If so go to www.cpu-central.com/k6-2upgrade.html It has some
info on doing this.hope it helps.
0
 
LVL 3

Expert Comment

by:gward28
Comment Utility
OK you ready here it is
k6 233-233Mhz(66x3.5)- 3.2v/3.3v split
k6 233-233mhz(66x3.5)- 3.3v/3.3v split
k6 233-233MHz(66x3.5)- 2.2v/3.3v split
k6 266-266Mhz(66x4.0)- 2,2v/3.3v split
K6 300-300Mhz(66x4.5)- 2.2v/3.45v split
K6-2 266-266Mhz(66x4.0) or 250Mhz(100X2.5)- 2.2v/3.3v split
k6-2 300-300Mhz(100x3.0)- 2.2v/3.3v split
K6-2 333-333Mhz(95x3.5)- 2.2v/3.3v split
k6-2 350-350Mhz(100x3.5)- 2.2v/3.3v split
some Mhz cpu's have more than One version like k6 233
some cpu's perform differently on different mainboards (k6-2 266)
also I can't remember but the k6-2 300 might have a 66mhz board
setting but I couldn't find it.

Buy the way this was bugging me so I went and got my folder from
work. HOPE THAT P_SSES jimat OFF!
0
Top 6 Sources for Identifying Threat Actor TTPs

Understanding your enemy is essential. These six sources will help you identify the most popular threat actor tactics, techniques, and procedures (TTPs).

 

Author Comment

by:second
Comment Utility
gward, as I understand the K6-2 333 and 350 can be run ONLY at 3.5x - I have a board with 83MHz bus and can I run the K6-2 333 to 4x83 or 5x66?
the voltages are OK.
I am not asking for the "official" multipliers supported....I need to know the multipliers(ALL) that the chips(266/300/333/350) will accept to find out what is the best solution for my board.



0
 

Author Comment

by:second
Comment Utility
If know about voltage settings on Shuttle 569 check my question from 9/12/98 and tell me how to set a MMX233 CPU with 2.9core/3.45 I/O... or K6-2/333 with 2.2core/3.45I/O
0
 
LVL 3

Expert Comment

by:gward28
Comment Utility
Ok as I see it you know how to set the core but you have no setting for the 3.45I/O or don't know what it is .But there is a small prob ,most mainboards are behind in this catagory .But most are sending out updates.And others would like you to purcase new board.(BS huh)THis is what I can do check updates
I can't promise anything but if find it your welcome to it.
0
 
LVL 3

Expert Comment

by:gward28
Comment Utility
You have the Shuttle 569 Mainboard with wich cipset?
0
 
LVL 3

Expert Comment

by:gward28
Comment Utility
Is this Shuttle 569 Mainboard 430tx
0
 
LVL 3

Expert Comment

by:gward28
Comment Utility
If I can't find it contact shuttle at 909-595-5060.I had the number I figured you might need it.
0
 
LVL 3

Expert Comment

by:gward28
Comment Utility
Have contacted a rep. HE said "I've got those printed out at work I'm Off today will be in tommarrow" and he will send them to me.I will post them when I them.I hope he's got what you want.
0
 

Author Comment

by:second
Comment Utility
Yes the chipset is TX.
Thanks for the Shuttle-number, but I am very far far away from USA.............
Help with the I/O 3.45 settings if you can - else don't worry........

The question about multipliers can be sayed so:
Work the K6-2/333 with 5x66?
Work the K6-2/350 with 5.5x66?
Support the K6-2/266  all 1.5x-4x ?
Support the K6-2/300  all 1.5x-4.5x ?
Support the K6-2/333  all 1.5x-5x ?
Support the K6-2/350  all 1.5x-5.5x ?
0
 
LVL 12

Expert Comment

by:public
Comment Utility
The I/O voltage is not critical, and on most MBs not adjustable. For example ATX supplies output nominal 3.3 V that powerws all of the logic. In other words you only need to worry about the core.
0
 

Author Comment

by:second
Comment Utility
public, I think that way too: > Help with the I/O 3.45 settings IF you can - ELSE don't worry........  :)
the multipliers?
0

Featured Post

What Is Threat Intelligence?

Threat intelligence is often discussed, but rarely understood. Starting with a precise definition, along with clear business goals, is essential.

Join & Write a Comment

Suggested Solutions

Title # Comments Views Activity
Refurbished 16 55
PCI standards 5 45
Backup Data/Portable NAS storage 4 48
Dell PERC S300 SAS Power Connections 9 39
Hello to users to the new age of computers. There are so many products to choose from nowadays that you maybe confused to understand which product is the correct product for you. Let me explain briefly what should be the idea product for your best n…
In the modern office, employees tend to move around the workplace a lot more freely. Conferences, collaborative groups, flexible seating and working from home require a new level of mobility. Technology has not only changed the behavior and the expe…
Illustrator's Shape Builder tool will let you combine shapes visually and interactively. This video shows the Mac version, but the tool works the same way in Windows. To follow along with this video, you can draw your own shapes or download the file…
This video shows how to remove a single email address from the Outlook 2010 Auto Suggestion memory. NOTE: For Outlook 2016 and 2013 perform the exact same steps. Open a new email: Click the New email button in Outlook. Start typing the address: …

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

14 Experts available now in Live!

Get 1:1 Help Now