Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

How to talk with modem trough DOS commands ?

Posted on 1998-09-28
2
Medium Priority
?
544 Views
Last Modified: 2013-12-27
Well, my modem says that there isn't dialtone. In effect, when I connect the modem to the line, all my telephones of that line doesn't go well. I mean the modem opens the line and don't hung it. I can connect if I get dial through my telephone and when there's dialtone I press the button connect of my Outlook Express.
Well, I need use commands to hang the line or to investigate what is happening with my modem (v.34 33.6) and why doesn't recognize dialtone.
For your information, when the modem is conected to the line (but PC is turned off and modem is turned off, too) nobody can call me. I need to disconnect the modem from the line. One week ago all was perfect.
0
Comment
Question by:netkuk
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 

Accepted Solution

by:
Grim092898 earned 150 total points
ID: 1145029
Alas, probably a broken relay in your modem.  Try giving the command "ATH" either in a terminal emulator or in DOS by typing "ECHO > COMx ATH" with x being the com port on which your modem is installed.

If that doesn't work, I would guess that you have a bad modem.

Best,
GriM
0
 

Author Comment

by:netkuk
ID: 1145030
Thanks. I think my modem is dead.
0

Featured Post

Supports up to 4K resolution!

The VS192 2-Port 4K DisplayPort Splitter is perfect for anyone who needs to send one source of DisplayPort high definition video to two or four DisplayPort displays. The VS192 can split and also expand DisplayPort audio/video signal on two or four DisplayPort monitors.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
When posting a question about a Cisco ASA, Cisco Router or Cisco Switch, it can aid diagnosis if a suitably sanitised copy of the config is provided. It is much better to leave as much of the configuration as original as possible, as it could be tha…
Video by: ITPro.TV
In this episode Don builds upon the troubleshooting techniques by demonstrating how to properly monitor a vSphere deployment to detect problems before they occur. He begins the show using tools found within the vSphere suite as ends the show demonst…
How to fix incompatible JVM issue while installing Eclipse While installing Eclipse in windows, got one error like above and unable to proceed with the installation. This video describes how to successfully install Eclipse. How to solve incompa…
Suggested Courses

661 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question