Solved

Linuxconf setup help

Posted on 1998-10-01
3
299 Views
Last Modified: 2010-03-18
I just installed Red Hat 5.1 with linuxconf and I would like get help with seting it up so I can use my web browser to change setings on the server I added Host put I csn't get acces to server it works fine in text mode using telnet but I will like to use web browser also I would like to know if there is a way to change web pages.
0
Comment
Question by:JBURGHARDT
  • 2
3 Comments
 
LVL 3

Accepted Solution

by:
marcelofr earned 30 total points
ID: 1587027
I suggest you to get ride of RH front end (called gecko) because it fails miserably with long screens and use standard linuxconf:

rpm -e gecko

I also recommend you to download latest version from ftp://ftp.solucorp.qc.ca/pub/linuxconf/devel/redhat-5.1/linuxconf-1.12r5.i386.rpm (mirrored at redhat's ftp site also)

Now you can enable web access running linuxconf and going to config -> networking -> linuxconf network access

Good luck
0
 
LVL 5

Author Comment

by:JBURGHARDT
ID: 1587028
Can you tell me where linuxconf stores it web pages and what I should type to acces it using web browser, because when I type tritron:98 I get nothing but Tritron:7070 works fine with pnserver.I also on linuxconf web page that they tesp page is www.xxxxx.com:8000 
0
 
LVL 5

Author Comment

by:JBURGHARDT
ID: 1587029
Thanks after I removed gecko and updated linuxconf all works fine
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How to add a new SAN disk to a linux vmware box 8 29
Unable to setup / install Cloudera on slave machine. 4 35
how does facebook / twitter store data? 3 121
linux 2 90
I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
This is a video that shows how the OnPage alerts system integrates into ConnectWise, how a trigger is set, how a page is sent via the trigger, and how the SENT, DELIVERED, READ & REPLIED receipts get entered into the internal tab of the ConnectWise …

914 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

17 Experts available now in Live!

Get 1:1 Help Now