Solved

sendmail setup

Posted on 1998-10-04
2
215 Views
Last Modified: 2013-12-23
I am trying to setup sendmail 8.8.8 on a Solaris 2.5.1 machine.  I run the makesendmail script and get the following error:
Configuration: os=SunOS, rel=5.5.1, rbase=5, rroot=5.5, arch=sun4, sfx=
Making in obj.SunOS.5.5.1.sun4
/usr/local/gnu/bin/gcc -I. -O -I/usr/sww/include -DNEWDBM -DNDBM -DNIS -DNISPLUS
 -DSOLARIS=20500  -c  alias.c
In file included from alias.c:35:
sendmail.h:1170: parse error before `TopFrame'
sendmail.h:1170: warning: data definition has no type or storage class
*** Error code 1
make: Fatal error: Command failed for target `alias.o'

Any help would be greatly appreciated.
0
Comment
Question by:qcoles
2 Comments
 

Expert Comment

by:mvpaba
ID: 1582403
Read the Readme file

I remember reading about the TopFrame Error

If I remember well you have to disable optimization during
compiling and use the latest version of gcc.

Mark
0
 
LVL 5

Accepted Solution

by:
tfabian earned 50 total points
ID: 1582404
try a different compiler..  I've run into problems where GCC doesn't work, but C++ does..  depending on what you've got installed on your system, I would try a different compiler...


good luck



0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

943 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

9 Experts available now in Live!

Get 1:1 Help Now