Solved

Hardware error or NT error ?

Posted on 1998-10-20
7
210 Views
Last Modified: 2013-12-28
I have these 2 problem shown at my NT 4.0 Event Viewer ...

1) \Device\SCSIPort0, did not respond within the timeout period

2) The driver detected a controller error on \Device\Harddisk0\Partition2

I have no problem accessing my harddisk and the network.

What is the problemm
0
Comment
Question by:khairi
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
7 Comments
 

Expert Comment

by:johal
ID: 1793879
I have seen this a couple of times with Dell and AST computers at customer sites.
Most often its a hardware problem.
It could be a cabling problem or if you are using different kind of SCSI devices eg. SCSI-1,SCSI-2, FW etc. this problem could occur. It ccan also be a problem with your terminator.
/Johan



0
 
LVL 1

Accepted Solution

by:
jminck earned 50 total points
ID: 1793880
This can be caused by the SCSI controller's bios, the hard drive's firmware, the SCSI driver, or cabling and termination. The first thing to do would be to contact the SCSI controller's vendor for a bios and driver update (and of course, verify that cabling and termination is correct).
0
 

Author Comment

by:khairi
ID: 1793881
What does it mean by "within the timeout period "

0
Don't miss ATEN at NAB Show April 24-27!

Visit ATEN at NAB Show to learn how our "Seamlessly Entertaining" solutions deliver fast, precise video streaming without delays for the broadcasting and media environment. ATEN will showcase its 16x16 Modular Matrix Switch (VM1600) and KVM Over IP Solution (KE6900 series).

 
LVL 1

Expert Comment

by:hkuiling
ID: 1793882
I had the same problem:
1.) On a Compaq Proliant 800. 2.) On a IBM Netfinity 3500
On both machines the first scsi id was the tapestreamer (HP surestor 24 DAT) and the second id was the HDD.
On my compaq the system would even hang. BSOD.
On yhe IBM the drive could not be mounted. After changing the SCSI-id I had the same problem. In the SCSI-BIOS I marked the item Auto-start and the problem was solved.
Herbert  
0
 

Author Comment

by:khairi
ID: 1793883
it is a digital server 3200 without scsi tape backup drive and only scsi harddisk with
3 partitiion

still waiting my digital vendor support to respond
0
 
LVL 1

Expert Comment

by:hkuiling
ID: 1793884
Q: Will de HD stops when there is no activity?
Q: Is partition2 de drive were your pagefile.sys is located?

I found 2 simular items at Microsoft:
Q153128 contents a problem with a 3com pci network card
Q154690 contents checking scsi id's and frimware version
0
 

Author Comment

by:khairi
ID: 1793885
It is cause by the harddisk.. something about harddisk track ..

Solution: replace harddisk
0

Featured Post

Don't miss ATEN at NAB Show April 24-27!

Visit ATEN at NAB Show to learn how our "Seamlessly Entertaining" solutions deliver fast, precise video streaming without delays for the broadcasting and media environment. ATEN will showcase its 16x16 Modular Matrix Switch (VM1600) and KVM Over IP Solution (KE6900 series).

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
Learn how to PXE Boot both BIOS & UEFI machines with DHCP Policies and Custom Vendor Classes
In this video, we discuss why the need for additional vertical screen space has become more important in recent years, namely, due to the transition in the marketplace of 4x3 computer screens to 16x9 and 16x10 screens (so-called widescreen format). …
The viewer will learn how to successfully create a multiboot device using the SARDU utility on Windows 7. Start the SARDU utility: Change the image directory to wherever you store your ISOs, this will prevent you from having 2 copies of an ISO wit…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question