Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

where do I find drivers?

Posted on 1998-10-22
3
167 Views
Last Modified: 2013-12-27
I live in London Ont. Canada and I had my computer upgraded by whaturned out to be a moron who happened to run a computer shop.  He upgraded the computer without giving (or installing) a driver for my modem.  It is a Logicode 33.6k fax modem with voice and I have tried accessing Logicode's website with no success (www.logicode.com)  I was wondering if there is a site where I can get old drivers for Logicode modems? thanks a lot
0
Comment
Question by:akais3000xl
3 Comments
 

Accepted Solution

by:
audra earned 100 total points
ID: 1145219
I am sorry that you ran into one of this computer moron's who mangled your machine.  As far as drivers goes, I have checked with www.driverguide.com and your not the only one in the same boat.  However the information I received from a different source is the following:

Logicode
              Logicode went out of business in February, and closed their web site in June. Logicode tech support is still available by calling 818-678-1850 or 818-678-1851. Tech support will email drivers and other software to you.

Or I found a site that if you fill in the information they will find the driver for you (at least thats what they say).  http://www.DriversHQ.com/  
Click on "Driver Request, Can't Find It".

Unfortunately, I believe the only way to get the drivers for this modem will be through their tech support numbers.  I tried calling them for you in hopes I could have them email it to me since I am in and around the 818 area code and unfortunately no one answered.  So you will need to keep trying them or just go out and buy you a new modem.



0
 
LVL 12

Expert Comment

by:Otta
ID: 1145220
Try using the "drivers" for a US Robotics Sportster.
Pick the "regular" modem, not the "winmodem".

Also, open HyperTerminal,
and enter 'AT&F' and report the response.
Enter 'AT&F1', and report the response.
Enter 'ATI0', and report the response.
Enter 'ATI1', and ...
 ...
Enter 'ATI11', and ...
Enter 'ATI12', and ...

Your modem may be "compatible-enough" with the USR modem.
0
 

Expert Comment

by:lcl
ID: 1145221
I know if you are looking for drivers, there is a site

http://www.windrivers.com/

It has a lot of drivers and it wouldn't be tough searching for a driver as there is a search utility too
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When posting a question about a Cisco ASA, Cisco Router or Cisco Switch, it can aid diagnosis if a suitably sanitised copy of the config is provided. It is much better to leave as much of the configuration as original as possible, as it could be tha…
Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question