Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 344
  • Last Modified:

SCSI install on IBM ps/2 model 90

How to get past the I9990022 error when installing a 4.5 gig
scsi hd on IBM PS/2 model 90 (8590-okd)
0
Xenwilder
Asked:
Xenwilder
  • 3
1 Solution
 
busukaCommented:
Check SCSI IDs (SCSI card also has its own ID) and termination.
Check every device in SCSI chain: termination should be on both
sides (most SCSI card has terminator control through DIPs/jumpers)

0
 
busukaCommented:
Yeah, in one chain should not be two SCSI devices with the same SCSI ID
number (usually from 0-7).

0
 
XenwilderAuthor Commented:
The problem is in the ibm bios, the ps2 had a 320 mg scsi hd that failed. I need to get the system partion on the new drive. this is why im getting the I99900XX error
0
 
busukaCommented:
Hmm, so I assume you can't boot ? In this case, take out failed HD and leave new one,
prepare bootable floppy on friend's computer and repartition/reformat new HD (or maybe
I don't completely understand what situation you are in ?).
0

Featured Post

[Video] Oticon Case Study

Open office environments can create the dynamics for innovation, but they also bring some challenges. With over 1,000 employees in an open office, Oticon needed a solution that would preserve the environment while mitigating disruptive background noises.

Watch how they did it.

  • 3
Tackle projects and never again get stuck behind a technical roadblock.
Join Now