Solved

Old logicode jumper settings...

Posted on 1998-10-30
1
160 Views
Last Modified: 2013-12-27
I have a 28.8 internal Logicode modem with 6 white switches at the back to set com and interrupt numbers.  Lost the book and now I need to get it to use interrupt four!  Any one can help?
0
Comment
Question by:carminel
1 Comment
 
LVL 6

Accepted Solution

by:
joopv earned 100 total points
ID: 1145324
For the logicode 2814HV and 28V14HV

switch 1 to 4 you set the interrupt :
irq 3 : on off off off
irq 4 : off on off off

switch 5 and 6 set the i/o port base :
com1 3f8 : on on
com2 2f8 : on off
com3 3e8 : off on
com4 2e8 : off off


0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a how to to configure a UCS Ethernet-uplink portchannel via the console. It is easy to do and can be done quite quickly. In certain versions of the UCS manager the portchannel has issues coming up and this is a workaround. I am…
Hi there, This article summarizes what you need if you are going to set up your home or small business Network Attached Storage (NAS) to be accessible from the internet. Of course there are configuration differences based on your NAS or router ma…
The Email Laundry PDF encryption service allows companies to send confidential encrypted  emails to anybody. The PDF document can also contain attachments that are embedded in the encrypted PDF. The password is randomly generated by The Email Laundr…
In a recent question (https://www.experts-exchange.com/questions/29004105/Run-AutoHotkey-script-directly-from-Notepad.html) here at Experts Exchange, a member asked how to run an AutoHotkey script (.AHK) directly from Notepad++ (aka NPP). This video…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question