muffy
asked on
Media Vision card compatability
in windows 95, control panel, under systems device manager,there appears to be a compatability issue with MEDIA VISION SOUND BLASTER
I looked in the driver section but in windows 95, control panel, under systems device manager,there appears to be a conflict....
I have looked for MEDIA VISION but I cant find them or get an updated driver to remove the conflict...
Where can I find a driver or what do i do to resolve the conflict?
thank you
john1178@prw.net
I looked in the driver section but in windows 95, control panel, under systems device manager,there appears to be a conflict....
I have looked for MEDIA VISION but I cant find them or get an updated driver to remove the conflict...
Where can I find a driver or what do i do to resolve the conflict?
thank you
john1178@prw.net
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
BTW the above comment is correct. If it is not a lack of drivers, but a conflict you can resolve it in the Control Panel's Device manager by double clicking on the computer icon and then seeing which devices are using the same IRQ or DMA.
ASKER
Gentlemen:
I will try to look for a conflict in the "IRQ conflicts and get back to you all" later
thank you john
By the way... Muffy is my cats name
I will try to look for a conflict in the "IRQ conflicts and get back to you all" later
thank you john
By the way... Muffy is my cats name
ASKER
Gentlemen:
First of all thank you for the advice!!!.
Long story short, and I will dispense with the vulgarities uttered to my KNOW IT ALL NEIGHBOR" Who, without my consent, installed an additional driver called MEDIA VISION PRO/PREMIER3D " JUST TO REMOVE THE CONFLICT:"
STATUS:
Under Control panel, system, device manager under SOUND, VIDEO AND GAME CONTROLERS. The following is found:
Game port and joy stick
MEDIA Vision ProAudio spectrum 16/plus/studio audio
on Irq 12
MEDIA Vision ProAudio spectrum 16/studio with scsi
on Irq 9
! Media vision pro/prem3d cant find irq's on this one now
the windows message says- DEVICE FAILURE TRY CHANGING DRIVERS FOR THIS DEVICE…. Code 17 (DON'T KNOW WHAT THIS MEANS)
However the first two media vision appear to have no conflicts (windows message)
BUT NOW MY SYSTEM HANGS UP ( stalls) BECAUSE OF THE ADDED DRIVER
How do I remove this unwanted driver… and please remember that I am pretty dumb about this alsoo in device usage there are two boxes one says exists in all hardward the other says ( I believe) delete any and all HELP IS REALLY NEEDED AND APPRECIATED
Thank you
John1178@prw.net
First of all thank you for the advice!!!.
Long story short, and I will dispense with the vulgarities uttered to my KNOW IT ALL NEIGHBOR" Who, without my consent, installed an additional driver called MEDIA VISION PRO/PREMIER3D " JUST TO REMOVE THE CONFLICT:"
STATUS:
Under Control panel, system, device manager under SOUND, VIDEO AND GAME CONTROLERS. The following is found:
Game port and joy stick
MEDIA Vision ProAudio spectrum 16/plus/studio audio
on Irq 12
MEDIA Vision ProAudio spectrum 16/studio with scsi
on Irq 9
! Media vision pro/prem3d cant find irq's on this one now
the windows message says- DEVICE FAILURE TRY CHANGING DRIVERS FOR THIS DEVICE…. Code 17 (DON'T KNOW WHAT THIS MEANS)
However the first two media vision appear to have no conflicts (windows message)
BUT NOW MY SYSTEM HANGS UP ( stalls) BECAUSE OF THE ADDED DRIVER
How do I remove this unwanted driver… and please remember that I am pretty dumb about this alsoo in device usage there are two boxes one says exists in all hardward the other says ( I believe) delete any and all HELP IS REALLY NEEDED AND APPRECIATED
Thank you
John1178@prw.net
Go to Settings/Control Panel/System/Device Manager/.
Tehn click (or double click) on Sound Video Game Controllers.
Remove the one giving you a problem.
Good luck
Tehn click (or double click) on Sound Video Game Controllers.
Remove the one giving you a problem.
Good luck
ASKER
THE SYSTEM SAYS it is part of a multifunction device and to remove its parent... when i tried to remove the top line SOUND VIDEO AND GAME CONTROLLERS IT STILL SAYS TO REMOVE THE PARENT ? what parent are they talking about
john1178@prw.net
thank you
john1178@prw.net
thank you
all you have to do is remove parent remove all under mulimedia in devices the restart computer it will detect once again and i have had luck with creative labs driver for this problem hope this helps...parent is the parent driver wich drives the card
ASKER
thank you greesy2 I did just as YOU SAID and I gotto reinsatll the multimedia components... which is VERY GOOD because I can start at a baseline
I now have, as we started a week or two ago. an incompatability which is a MEDIA VISION BLASTER INCOMPATABILITY
under properties/driver there is a MEDIA VISION INCOPMATABILITY
Thank you VERY MUCH FOR GETTING ME BACK EVEN....
any Ideas how to resolve the original issue..
the window menu's on the previous stste-- NO CONFLICT
Any ideas?
thank you and I am sorry to be so Dumb
jihn
I now have, as we started a week or two ago. an incompatability which is a MEDIA VISION BLASTER INCOMPATABILITY
under properties/driver there is a MEDIA VISION INCOPMATABILITY
Thank you VERY MUCH FOR GETTING ME BACK EVEN....
any Ideas how to resolve the original issue..
the window menu's on the previous stste-- NO CONFLICT
Any ideas?
thank you and I am sorry to be so Dumb
jihn
If it is the IRQ conflicts, check for IRQ 5 and 7, which is the most commonly used IRQ for Sound Blaster Emulation device.
Tell us more about the devices conflicting.