Solved

runtime error

Posted on 1998-11-12
3
603 Views
Last Modified: 2013-12-29
while running scandisk, it stop and runtime error R6003, interger diveded by ourface scandisk, comes up. what should i do to correct this,
0
Comment
Question by:judy1
3 Comments
 
LVL 95

Expert Comment

by:Lee W, MVP
ID: 1804918
Are you using DriveSpace or DoubleSpace?  If so, this may be you're problem and answer.  Let me know and I'll post it as the answer.

The information in this article applies to:

          Microsoft MS-DOS operating system versions 6.0, 6.2, 6.22

      This information applies to both Microsoft DoubleSpace and Microsoft DriveSpace. For MS-DOS 6.22, use DRVSPACE in place of DBLSPACE for commands and filenames.

      SYMPTOMS

      You may receive the following error message if you are using MS-DOS DoubleSpace:

         Error: R6003 - Integer Divide by Zero


      CAUSE

      This error message can be caused by corrupted DoubleSpace files or incompatible terminate-and-stay-resident (TSR) programs.

      WORKAROUND

      To work around this problem, do the following:

        1.Copy the DBLSPACE.BIN file from Disk 1 of the original MS-DOS Upgrade disk set to the root directory for your host drive. For example, if your compressed drive is C, and your host
          drive is H, type the following at the MS-DOS command prompt and then press ENTER:

                copy a:\dblspace.bin h:\

          To determine your host drive for drive C, type "dblspace /list" (without the quotation marks) at the MS-DOS command prompt and then press ENTER.

          Note: If there is an existing DBLSPACE.BIN file on the host drive but it is corrupted, remove the attributes from the file before copying a new one to the drive. For example, type
          "attrib h:\dblspace.bin -r -s -h" (without the quotation marks) at the MS-DOS command prompt and then press ENTER.

        2.Expand the DBLSPACE.EXE files from the original MS-DOS disks. For example, type the following at the MS-DOS command prompt and then press ENTER:

                expand a:\dblspace.ex_ c:\dblspace.exe

          DBLSPACE.EX_ is located on Disk 3 of the 1.44-megabyte (MB) 3.5-inch disk set and on Disk 4 of the 1.2-MB 5.25-inch disk set.

        3.Restart your computer by pressing the reset button or by turning the machine off and then on again.

        4.If you have not eliminated the problem, restart your computer again. To isolate the problem, press the Clean Start function key (F5) or the Interactive Startup function key (F8) when
          the text "Starting MS-DOS..." appears to eliminate unnecessary device drives and TSRs.
0
 

Accepted Solution

by:
Rybird1 earned 50 total points
ID: 1804919
reinstal scandisk,drvspace, dblspace, and make sure that config.sys
autoexec.bat
system.ini
and
win.ini

0
 

Author Comment

by:judy1
ID: 1804920
thanks for your help !
0

Featured Post

Will my email signature work in Office 365?

You've built an email signature using raw HTML code in Office 365, but you can't review how it looks with Transport Rules. So you have to test it over and over again before it can be used. Isn't this a bit of a waste of your time? Wouldn't a WYSIWYG editor make it a lot easier?

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
deploy workstation 4 81
profile migration 14 39
Can't get access/ownership to folder 3 89
Group Policies not being applied 12 32
A Bare Metal Image backup allows for the restore of an entire system to a similar or dissimilar hardware. They are highly useful for migrations and disaster recovery. Bare Metal Image backups support Full and Incremental backups. Differential backup…
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
This Micro Tutorial will give you a basic overview of Windows DVD Burner through its features and interface. This will be demonstrated using Windows 7 operating system.
This is used to tweak the memory usage for your computer, it is used for servers more so than workstations but just be careful editing registry settings as it may cause irreversible results. I hold no responsibility for anything you do to the regist…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

23 Experts available now in Live!

Get 1:1 Help Now