Solved

Samba Server problems...

Posted on 1998-11-12
2
308 Views
Last Modified: 2013-12-23
I compiled Samba 1.9.18p10 on Solaris 2.5.1 and started testing with my Win95 client.
I added the startup entries to /etc/rc3.d and /etc/inet.conf.

[1.] I can send a message to Winpopup on my Win95 client but I get a broken pipe error when I try to send a message to any other client on the same subnet.

[2.] I want to be able to browse this server from a Win95 client located on a remote subnet which is participating in
a WAN consisting of Solaris servers, Win95 clients, and routers.

[3.] I want to be able to map a drive from the Samba server to a Win95 client located on a remote subnet.

[4.] We need to setup an Enterprise Mail system over the WAN. We are currently using Microsoft Mail using a PC gateway and dial-up connections.
What do I need to implement Enterprise Mail using Solaris
and Windows95 clients with Inbox?

[5]  How can I open a Samba session from my Win95 client DOS prompt?

I have printed some documentation, but I would like some advice on what and how to configure Samba to accomplish these requirements.
0
Comment
Question by:dweatherb
2 Comments
 

Author Comment

by:dweatherb
ID: 1582592
Edited text of question
0
 
LVL 51

Accepted Solution

by:
ahoffmann earned 100 total points
ID: 1582593
1) see 2)
2) see BROWSING.txt
    AFAIK, best is if your Samba server is a gateway for the subnets, otherwise you
    also need to read DOMAIN.txt carefull
    in samba.cnf add:
         remote announce = remote_network_broadcast/DOMAIN
    instead of the broadcast address, you also may try a browser server address
3) see 2)
4) Microsoft Mail is proprietary (remeber M$), it'll be  hard to find software for
     Solaris supporting this
     I suggest using a mail exchanger based on SMTP protocol
5) install M$'s LANMAN client for DOS, then
         net use x: \\samba_server\share_name

0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
paypal ipn status 4 61
E-mail delayed during DNS server reboot 8 52
BGP recommended setup with failover 2 49
VPN Server config in Modem 5 31
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question