Solved

setting up midi with yamaha dx27

Posted on 1998-11-15
2
1,230 Views
Last Modified: 2013-11-09
I have a sb16 sound card and a yamaha dx27.  Can't get the keyboard to work with the setup.  I am connected using a jostick/midi cable with the in and out connected to the keyboard (in on out and out on in).  The software I'm using is cakewalk 6.0.  I am not getting anything.  When i play on the keyboard, there is no midi activity whatsoever.  Is there a special setup for the dx27.  I do not have the manual so I do not know how to set up the synth.  
0
Comment
Question by:cedra
  • 2
2 Comments
 
LVL 1

Accepted Solution

by:
ryanic earned 100 total points
ID: 1129128
Did you go to Device Manager=> Multimedia => MIDI tab and change you MIDI Output device to "MPU401"?




0
 
LVL 1

Expert Comment

by:ryanic
ID: 1129129
Sorry, I mean the Control Panel=>Mulitmedia=>MIDI Tab and MIDI Ouput device selection. Sorry again.
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In this article we have discussed the manual scenarios to recover data from Windows 10 through some backup and recovery tools which are offered by it.
I use more than 1 computer in my office for various reasons. Multiple keyboards and mice take up more than just extra space, they make working a little more complicated. Using one mouse and keyboard for all of my computers makes life easier. This co…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…
I've attached the XLSM Excel spreadsheet I used in the video and also text files containing the macros used.

790 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question