Solved

Problem with my monitor under X server

Posted on 1998-12-05
3
198 Views
Last Modified: 2013-12-15
Red Hat 5.1
Video card S3 Virge GX2
when i start X server my monitor(LG Studioworks 76i) blank
although i configure Hoz and Ver are in range(from LG manual).When shutdown X server everything alright.
0
Comment
Question by:tungsim
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
3 Comments
 
LVL 2

Expert Comment

by:vx
ID: 1631787
What error(s) does X report? Try running "startx 2> errorlog".
0
 

Expert Comment

by:hallstein
ID: 1631788
did you use xf86config? - try with a monitor with a lower frequency - sounds like your monitor cant handle the resolution and or Hz
0
 

Accepted Solution

by:
sbobk earned 50 total points
ID: 1631789
An answer and two suggestions. The refresh rate that you are specifying is too high, thus give a lower refresh during xf86config (on horizontal a safe choice is probably  6  31.5 - 48.5; Non-Interlaced SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz for vertical a safe choice is probably 3  50-100). Also after specifying this in the config try both 1)Starting with a different pixel depth (i.e. startx -- -bpp 16 or -bpp 32 or -bpp 24) or 2) change the resolution by typing ctrl-alt-+ or ctrl-alt-- (minus and plus signs). Good Luck :)
0

Featured Post

Don't Cry: How Liquid Web is Ensuring Security

WannaCry is just the start. Read how Liquid Web is protecting itself and its customers against new threats.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

rdate is a Linux command and the network time protocol for immediate date and time setup from another machine. The clocks are synchronized by entering rdate with the -s switch (command without switch just checks the time but does not set anything). …
If you have a server on collocation with the super-fast CPU, that doesn't mean that you get it running at full power. Here is a preamble. When doing inventory of Linux servers, that I'm administering, I've found that some of them are running on l…
Connecting to an Amazon Linux EC2 Instance from Windows Using PuTTY.
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

717 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question