• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 299
  • Last Modified:

Building with an ATX case

Hi there. I'm about to build a Pentium II, 350. I've never built anything with an ATX case before. Is there any advice or tips I'll need when it comes to building with the ATX case.
1 Solution
Be sure the Power Switch is correctly installed on the Motherboard.
... I've never seem power switch that's connected to a motherboard...  It's just a set of connectors run from power supply to your motherboard.  ATX is far more advance form then Baby-AT, it's got better overall cooling and more advance feature support, like keyboard power on, software power off etc..  If you're able to put together a Baby-AT you should have no problem putting together an ATX.
All ATX case's have a power switch that connects to the Motherboard.
Suggestion:  Buy a motherboard capable of handling PC100 RAM and expandable past the 350MHz chip.  As far as the case and motherboard go, make sure they're both ATX compatible.  The AT and ATX power supplies have different motherboard power connectors.  
 also,with the atx cases,moreso than on other styles,make sure to unplug it before working on it.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

WEBINAR: GDPR Implemented - Tips & Lessons Learned

Join the WatchGuard team on Thursday, March 29th as we recount some valuable lessons learned in weighing the needs of a business against the new regulatory environment, look ahead at the two months left before implementation, and help you understand the steps you can take today!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now