Solved

UART (16550) support for UnixWare 2.1.2

Posted on 1998-12-15
2
314 Views
Last Modified: 2013-12-05
Where can I view/change configuration parameters for FIFO serial ports in UnixWare 2.1.2? In SCO I found TTYHOG and NCLIST, what about UnixWare?
0
Comment
Question by:dda
2 Comments
 
LVL 14

Accepted Solution

by:
chris_calabrese earned 100 total points
ID: 2008411
No special tweaking is needed in UnixWare 2.x to support a 16550 UART, but see the UnixWare FAQ on high-speed serial setup at http://www.freebird.org/faq/trouble.html#t17 (actually works even if you don't have a 16550, though it requires more work from the CPU).
0
 
LVL 4

Author Comment

by:dda
ID: 2008412
Ok, thanks. A I've found some PTF was issued by SCO to fix problems with serial communications, but it didn't solve the problem. And at last we've changed motherboard :)

0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This tech tip describes how to install the Solaris Operating System from a tape backup that was created using the Solaris flash archive utility. I have used this procedure on the Solaris 8 and 9 OS, and it shoudl also work well on the Solaris 10 rel…
Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…
Learn how to find files with the shell using the find and locate commands. Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.:
This video shows how to set up a shell script to accept a positional parameter when called, pass that to a SQL script, accept the output from the statement back and then manipulate it in the Shell.

947 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

22 Experts available now in Live!

Get 1:1 Help Now