Solved

95: No Logon Prompt at Boot

Posted on 1998-12-18
3
185 Views
Last Modified: 2013-12-23
I have a '95.a machine, with Client for MS Networks, NIC and TCP/IP installed.  When the machine boots, there is no prompt for a network logon at all.  Start-Shutdown-Close All will return a logon prompt that does work.

- Logon IS set to microsoft client for networks.
- Card does function; does get DHCP address.

Thanks,
Scott
0
Comment
Question by:scdavis
3 Comments
 
LVL 5

Accepted Solution

by:
theh95 earned 100 total points
ID: 1547167
Try this, goto the registry to Disable password Caching,
HKEY_LOCAL_MACHINE\SOFTWARE\Mircosoft\Windows\CurrentVersion\Policies\Network Create a new Binary Value,
         DisablePwdCaching     01 00 00 00
Automatic Logon to Profile in windwos
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Network\Real Mode Net Make sure Value "Autologon" either does NOT exist, or value is set to 1.

Good Luck

0
 

Expert Comment

by:rquickenden
ID: 1547168
Here are some things to try;

1.) Check that the network adapter has been detected - use the device manager in control panel

2.) In network properties,click on "Client for Microsoft Networks" and then click "Properties"

3.)  Ensure that "Logon To a WindowsNt Domain" is selected and the domain name is correctly filled in!

4.) Next click on the "Access Control" tab and ensure that "User Level Access Control" is selected.  Enter the name of Your WindowsNt Domain

5.) Close control panel and restart your computer!  


_______
If you have problems, add NetBeui to both the server and Win95 client (as there could be a problem with your TCP/IP stack)

0
 
LVL 7

Author Comment

by:scdavis
ID: 1547169
Excellent - the second reg. entry got it.  (Didn't try the first).  

Thanks so much!


0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
IPv6 Implementation - Cisco ASA5512 and Windows DHCPv6 1 67
Communication with an active RFID 7 82
OpenVPN Speed limitation to only 10 mbps 7 227
DNS/WINS in a domain 10 37
Enterprise networks where VoIP phones have been deployed frequently use port configurations that allow both a computer and an IP phone to be plugged into the same switch port but use different VLANs. On Cisco equipment I'm referring to the "native V…
This is the first one of a series of articles I’ll be writing to address technical issues that are always referred to as network problems. The network boundaries have changed, therefore having an understanding of how each piece in the network  puzzl…
Although Jacob Bernoulli (1654-1705) has been credited as the creator of "Binomial Distribution Table", Gottfried Leibniz (1646-1716) did his dissertation on the subject in 1666; Leibniz you may recall is the co-inventor of "Calculus" and beat Isaac…
How to Install VMware Tools in Red Hat Enterprise Linux 6.4 (RHEL 6.4) Step-by-Step Tutorial

685 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question