Solved

Laserwriter IINTX warning light indications

Posted on 1999-01-09
4
416 Views
Last Modified: 2010-05-18
Is there a complete table of warning lights that show exactly what the problems could be on Laserwriter IINT/NTX?  I have 2 red lights blinking right now.  what does it mean.  paper out and paper jam.
0
Comment
Question by:rhomer
  • 2
4 Comments
 
LVL 1

Expert Comment

by:hddp666
ID: 2014001
The HP site has access to owner's manuals and error codes.
0
 

Author Comment

by:rhomer
ID: 2014002
No what praytell does HP have to do with an Apple Laserwriter...huh?
0
 

Accepted Solution

by:
dmichels earned 100 total points
ID: 2014003
Laserwriter Status Lights

(1) Ready    Steady = ready to print
Green        Off= Cannot print due to error or cover is open
             Flashing= Warming up or processing a print job

(2) Toner    Steady= Low toner
Orange       Off=Toner OK
             Flashing= Toner cartridge incorrectly installed

(3) Paper    Steady= Paper cassette empty
Red          Off= Paper supply OK
             Flashing= Ready for next sheet for manual feed OR
             Printer requires service

(4) Jam      Steady= There is a paper jam
Red          Off= paper path is OK
             Flashing= Printer requires service

When lights #3 and 4 are either flashing or steady, the printer requires service.

My experience with light #4 flashing is the printer is not properly connected (usually when connected to a PC). I would also check the fusing unit..is it hot, or as there anything stuck between the fusing rollers? Are any of the corona wires broken? If the fusing unit looks OK, then check/replace the ozone cartridge if it has one.  

The previous answer about the HP web site relates to the fact that both HP and Apple used the same Canon SX engine in their printers or this era.  

There is also good technical information to be found at:
www.laserwizard.com
www.printerworks.com
www.printworx.com

Hope this helps...
0
 

Author Comment

by:rhomer
ID: 2014004
Thanks, this was the answer i was looking for.
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you use a Brother DCP 130C or similar Brother printer, at some point you might encounter the following problem: after you change the ink cartridge, the printer displays an "ink empty" message. Sometimes you just need to follow the instructions…
When I recently replaced my image transfer kit on my office HP color laserjet 5550dn printer, I had a slight problem.  The left bracket that holds the transfer kit got stuck in the upright locked position instead of being at a 45 degree angle facing…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question